|
Forums59
Topics1,039,142
Posts13,959,864
Members144,192
| |
Most Online39,925
Dec 30th, 2023
|
|
 2017 250 ProXs impeller change
#14467559
09/03/22 11:38 PM
|
Joined: Apr 2013
Posts: 427
IKELEVI
OP
Angler
|
|
OP
Angler
Joined: Apr 2013
Posts: 427 |
Changing my impeller on Monday. Watched a couple of videos and doesn't seem too hard. You guys have any tips or tricks to doing this? Do you guys lube the impeller with anything etc? Thank you!
17 LEGEND V20
17 MERCURY 250 Optimax ProXs
22 Ram 2500 4x4 6.7 Cummins
|
|
|
Re: 2017 250 ProXs impeller change
[Re: IKELEVI]
#14467594
09/04/22 12:31 AM
|
Joined: Nov 2014
Posts: 23,400
SteezMacQueen
TFF Guru
|
|
TFF Guru
Joined: Nov 2014
Posts: 23,400 |
I recently changed mine. It was 95% easy with 5% you gotta be joking. The woodruff key would not come out. I worked on that part for an hour.
It really helps to have a very stable surface to work on. I cut a piece of 1†mdf with a slot in it to hold the lower unit. I put a little vasoline on the impeller to help slide it into the housing.
Eat. Sleep. Fish.
|
|
|
Re: 2017 250 ProXs impeller change
[Re: IKELEVI]
#14467604
09/04/22 01:04 AM
|
Joined: May 2004
Posts: 13,654
Tiltman
TFF Guru
|
|
TFF Guru
Joined: May 2004
Posts: 13,654 |
I use superlube when I change em , I am working Monday if you want to drag it down to NAPA I make sure you get it done correctly I done a few over the years.
|
|
|
Re: 2017 250 ProXs impeller change
[Re: IKELEVI]
#14467716
09/04/22 03:16 AM
|
Joined: Jan 2018
Posts: 310
angleiron
Angler
|
|
Angler
Joined: Jan 2018
Posts: 310 |
|
|
|
Re: 2017 250 ProXs impeller change
[Re: IKELEVI]
#14467761
09/04/22 11:52 AM
|
Joined: May 2012
Posts: 906
Bryanmc57
Pro Angler
|
|
Pro Angler
Joined: May 2012
Posts: 906 |
I always use dawn dish soap to lube the impeller for reassembly. Get a couple of 3" bolts (I think they are M6x1.00) and cut the heads off them to make guide pins, makes assembly much easier.
Steez: Not sure why the key wouldn't come out. I've never had one that didn't just fall off the driveshaft when I took the impeller off.
Honora Primum Vel Nullum Omnin Honorem
|
|
|
Re: 2017 250 ProXs impeller change
[Re: Bryanmc57]
#14468106
09/04/22 08:07 PM
|
Joined: Nov 2014
Posts: 23,400
SteezMacQueen
TFF Guru
|
|
TFF Guru
Joined: Nov 2014
Posts: 23,400 |
I always use dawn dish soap to lube the impeller for reassembly. Get a couple of 3" bolts (I think they are M6x1.00) and cut the heads off them to make guide pins, makes assembly much easier.
Steez: Not sure why the key wouldn't come out. I've never had one that didn't just fall off the driveshaft when I took the impeller off. One word….YAMAHA!
Eat. Sleep. Fish.
|
|
Moderated by banker-always fishing, chickenman, Derek ðŸ, Duck_Hunter, Fish Killer, J-2, Jacob, Jons3825, JustWingem, Nocona Brian, Toon-Troller, Uncle Zeek, Weekender1
|
