These will be horizontal 2x6 gates to match the fence. Then there's a third over an existing slab that will be a partial fence build too. Prob 200 yards from the beach. So stainless. 2x6 on both sides to 4 ft high, so heavy. Doing a kreg joint on corners with x braces for support. Always fun.

One gate frame done. The corners are not screws into endgrain but rather kreg joints using the xl jig.

Second verse, same as the first. Both are loaded in the p/u and headed across the ferry manana. Plan is to mount these two and place the horizontal 2x6 pickets Then I have about a 20 foot section of fence to build on an existing slab under the stilt home. I'll build the gate on site for that section.

Nice work!!!👍👍