|
Forums59
Topics1,156,761
Posts15,815,621
Members143,336
| |
Most Online36,273
Jan 23rd, 2013
|
|
 Running an Optimax with low water pickup on muffs
#14384715
06/04/22 03:32 AM
|
Joined: Apr 2004
Posts: 12,870
Stump jumper
OP
TFF Guru
|
|
OP
TFF Guru
Joined: Apr 2004
Posts: 12,870 |
My Optimax has a water pick up on the nose. I have never run it on the hose. Do I need special muffs or can I just run it on the regular ones.
2200 Bay Champ/200 Mercury Optimax
2017 Tundra TSS 4x4 Crewmax 5.7L
|
|
|
Re: Running an Optimax with low water pickup on muffs
[Re: Stump jumper]
#14384846
06/04/22 02:19 PM
|
Joined: Jan 2002
Posts: 1,588
Micheal
Extreme Angler
|
|
Extreme Angler
Joined: Jan 2002
Posts: 1,588 |
You can run it on regular muffs BUT you have to duck tape the holes on the nose. I know as I have one and have done it several times. Make sure you do it when the nose is dry or the tape will not stick. Don't plan on running it long.
Micheal's Marine. Mobile Boat-Motor Repair Ser.
Dakota Lithium Battery Dealer
Lake Fork Trolling Motor sales and ser. Lowrance Dealer
|
|
|
Re: Running an Optimax with low water pickup on muffs
[Re: Micheal]
#14384853
06/04/22 02:25 PM
|
Joined: Apr 2004
Posts: 12,870
Stump jumper
OP
TFF Guru
|
|
OP
TFF Guru
Joined: Apr 2004
Posts: 12,870 |
You can run it on regular muffs BUT you have to duck tape the holes on the nose. I know as I have one and have done it several times. Make sure you do it when the nose is dry or the tape will not stick. Don't plan on running it long. Thanks, that is what is was thinking. Putting a new water pump impeller in and just wanted to test. I have done as many as I can count on my hands and missed the water tube when stabbing the lower once.
2200 Bay Champ/200 Mercury Optimax
2017 Tundra TSS 4x4 Crewmax 5.7L
|
|
|
Re: Running an Optimax with low water pickup on muffs
[Re: Stump jumper]
#14385825
06/05/22 10:06 PM
|
Joined: Sep 2008
Posts: 112,924
hopalong
Pescador Loco
|
|
Pescador Loco
Joined: Sep 2008
Posts: 112,924 |
" Hop, set the hook"!
hopalong 99,999
TexDawg 99,999
FJB! not my president by a long shot!
lake fork FISHERMANS COVE MARINA/reservations - 903 474 7479
|
|
|
Re: Running an Optimax with low water pickup on muffs
[Re: hopalong]
#14386184
06/06/22 02:10 PM
|
Joined: Apr 2004
Posts: 12,870
Stump jumper
OP
TFF Guru
|
|
OP
TFF Guru
Joined: Apr 2004
Posts: 12,870 |
Thanks Hop, I figured there was something out there were motors with pickups in the nose cone.
2200 Bay Champ/200 Mercury Optimax
2017 Tundra TSS 4x4 Crewmax 5.7L
|
|
|
Re: Running an Optimax with low water pickup on muffs
[Re: Stump jumper]
#14386219
06/06/22 02:51 PM
|
Joined: Dec 2008
Posts: 14,616
grout-scout
TFF Guru
|
|
TFF Guru
Joined: Dec 2008
Posts: 14,616 |
Like mentioned above, I also use duct tape, works good enough.
|
|
|
Re: Running an Optimax with low water pickup on muffs
[Re: Stump jumper]
#14386240
06/06/22 03:11 PM
|
Joined: Apr 2004
Posts: 12,870
Stump jumper
OP
TFF Guru
|
|
OP
TFF Guru
Joined: Apr 2004
Posts: 12,870 |
I filled a big can with water and supported the front with a saw horse. I put my muffs on and turned water on. Now have 3 to 4 PSi at idle versus gauge barely moving. I was planning to change it when weather cooled but it was over due. ![[Linked Image]](https://texasfishingforum.com/forums/pics/userpics/2022/06/full-6989-141720-20220606_101206.jpg) ![[Linked Image]](https://texasfishingforum.com/forums/pics/userpics/2022/06/full-6989-141719-20220606_100435.jpg)
2200 Bay Champ/200 Mercury Optimax
2017 Tundra TSS 4x4 Crewmax 5.7L
|
|
Moderated by banker-always fishing, chickenman, Derek 🐝, Duck_Hunter, Fish Killer, J-2, Jacob, Jons3825, JustWingem, Nocona Brian, Toon-Troller, Uncle Zeek, Weekender1
|
![[Linked Image]](https://bobsmachine.com/wp-content/uploads/2017/07/1-33.jpeg)