J-Moe, first a disclaimer and some fine print: While I do have some game, I am by no means an expert at finding these fish. Second, finding the fish is 99.9% of successful catching. This is why people hire guides because guides know how to find fish. Third, not having lake-fished for hybrids (all the hybrid fishing I’ve done has been in rivers and creeks) I don’t know if the techniques I use to find and catch striper will work for hybrids…….but to some degree I think they will.
All that being said, here’s what I have to offer.
I carry two rods: A 6wt Scott Meridian lined with a 6”/second full-sink line, 3’ - 4’, 20lb leader. And, a 4wt Orvis Helios II lined with a floating line and 10’, 20lb leader. I prefer the Rio Grand line for this rod. The Meridian is amazing at casting the heavy full-sink line and it has the backbone to lift an elephant from a depth of 25’. The Helios II also has great lifting power and makes catching the 16”-18” fish a lot of fun. However, when windy I leave the 4wt at home and carry my 6wt Sage XP with a floating line.
Flies: I use a size 2 clouser or a 6” deceiver. You can use whatever you want but size is the critical variable. Striper will eat the clouser 95% of the time and the deceiver maybe 50% of the time. So, I usually start with the clouser and, if the getting is good, may switch to the deceiver for grins. On days when they won’t eat either of these two flies, they probably won’t eat any fly.
In the first screen shot above, the depth is 19’ and, while there is a mess of fish in the bottom 10’, there’s also a lot of fish higher up. Some as little as 8’ deep so here my first choice was to grab the 4wt with the floating line and try to drop the clouser (medium lead eye) down to the fish and vertically jig it over their heads. It worked and produced the fish in the first fishpic above.
In the second screen shot above, all the fish are below 10’ so I used the sink line. And Voilà, I catch fish! (fishpic #2 above). Generally speaking, below 10’ = sink line. Above 10’, I’ll try the floating line first but be ready to switch to the sink if I don’t get bit.
When I first started doing this 10’ of water scared me. I was thinking way to deep. Now, I don’t think twice about fishing 25’ to 30’. Of course, the shallower the better but catching good fish, even at 25’, never gets old.
How do I pick my spots? I’m looking for humps, drop offs, creeks and other cuts. For example, in the two screen shots above I’m concentrating on the drop off from shallow water near shore down into a fairly deep ravine. And, in the screen shots below I’m locating fish on top of and around a hump. Note that I found fish on top of the hump and again in 22’ down one side. These screen shots are from yesterday.
![[Linked Image]](https://texasfishingforum.com/forums/pics/userpics/2022/06/full-89398-141355-06_01_22_2.png)
![[Linked Image]](https://texasfishingforum.com/forums/pics/userpics/2022/06/full-89398-141356-06_01_22_1.jpg)
![[Linked Image]](https://texasfishingforum.com/forums/pics/userpics/2022/06/full-89398-141357-06_01_22_6.png)
![[Linked Image]](https://texasfishingforum.com/forums/pics/userpics/2022/06/full-89398-141358-06_01_22_2.jpg)
![[Linked Image]](https://texasfishingforum.com/forums/pics/userpics/2022/06/full-89398-141359-06_01_22_4.png)
J-Moe, here in north Texas we hear rumors of you and your practice of a very powerful style of SBKF (sand bass kung fu). If you get out on the lake, try the various techniques of your discipline on the hybrids and see what gets them to bite. Hybrids and striper are just like sandies in that they don’t always want it the same way. I’m confident that if you find them you will figure out what it takes to catch them. Best of Luck!
Oh yeah, if by chance any guides happen to read this post I would very much appreciate your input but please keep in mind fly rod = shallow water. Thanks!