|
Forums59
Topics1,039,137
Posts13,959,750
Members144,192
| |
Most Online39,925
Dec 30th, 2023
|
|
 Damaged trailer spindle question?
#14342364
04/13/22 01:16 PM
|
Joined: Jun 2017
Posts: 2,382
Lone_Wolf
OP
Extreme Angler
|
|
OP
Extreme Angler
Joined: Jun 2017
Posts: 2,382 |
Dad shelled a bearing this weekend the smaller outer one, there's a small groove in the spindle now, 1/16 to 1/32" deep. Is the spindle ruined and continue to have issues if you throw new bearings on it?
|
|
|
Re: Damaged trailer spindle question?
[Re: Lone_Wolf]
#14342368
04/13/22 01:18 PM
|
Joined: May 2019
Posts: 6,843
avid_basser
TFF Celebrity
|
|
TFF Celebrity
Joined: May 2019
Posts: 6,843 |
I would replace just for ease of mind
|
|
|
Re: Damaged trailer spindle question?
[Re: Lone_Wolf]
#14342381
04/13/22 01:26 PM
|
Joined: Oct 2005
Posts: 20,755
kingdad101
TFF Guru
|
|
TFF Guru
Joined: Oct 2005
Posts: 20,755 |
Look at a 'Speedy Sleeve'.. Parts house or Bearing store
|
|
|
Re: Damaged trailer spindle question?
[Re: kingdad101]
#14342457
04/13/22 02:06 PM
|
Joined: Mar 2010
Posts: 25,824
T Bird
TFF Guru
|
|
TFF Guru
Joined: Mar 2010
Posts: 25,824 |
Look at a 'Speedy Sleeve'.. Parts house or Bearing store plus 1
Okie by birth, Texan by choice. ![[Linked Image]](https://texasfishingforum.com/forums/pics/userpics/2021/01/full-47849-80883-111.jpg) USAF "Thunderbirds" Alumni 1985-1989
|
|
|
Re: Damaged trailer spindle question?
[Re: Lone_Wolf]
#14342507
04/13/22 02:32 PM
|
Joined: May 2002
Posts: 5,037
leethefishking
TFF Celebrity
|
|
TFF Celebrity
Joined: May 2002
Posts: 5,037 |
The bearings rest around the entire spindle. Clean the gouge with an Emory cloth then seat a set of bearings on the spindle and see if there is any play. If not then you are good to go.
|
|
|
Re: Damaged trailer spindle question?
[Re: Lone_Wolf]
#14342552
04/13/22 02:55 PM
|
Joined: Jun 2006
Posts: 690
basseditor
Pro Angler
|
|
Pro Angler
Joined: Jun 2006
Posts: 690 |
I had a trailer repair place cut off and weld on a new spindle. It works good as new.
|
|
|
Re: Damaged trailer spindle question?
[Re: Lone_Wolf]
#14342587
04/13/22 03:33 PM
|
Joined: Feb 2004
Posts: 5,550
206champion
TFF Celebrity
|
|
TFF Celebrity
Joined: Feb 2004
Posts: 5,550 |
I had the same issue several years ago I put a sleeve on it and it worked great it was still on there when I sold the boat.
|
|
|
Re: Damaged trailer spindle question?
[Re: leethefishking]
#14342599
04/13/22 03:46 PM
|
Joined: Jun 2017
Posts: 2,382
Lone_Wolf
OP
Extreme Angler
|
|
OP
Extreme Angler
Joined: Jun 2017
Posts: 2,382 |
The bearings rest around the entire spindle. Clean the gouge with an Emory cloth then seat a set of bearings on the spindle and see if there is any play. If not then you are good to go. OK he may be good to go the groove is only 1/8" wide to add to the depth I posted earlier, will wait and see if there is any play.
|
|
|
Re: Damaged trailer spindle question?
[Re: Lone_Wolf]
#14342766
04/13/22 05:49 PM
|
Joined: Nov 2014
Posts: 23,400
SteezMacQueen
TFF Guru
|
|
TFF Guru
Joined: Nov 2014
Posts: 23,400 |
The bearings rest around the entire spindle. Clean the gouge with an Emory cloth then seat a set of bearings on the spindle and see if there is any play. If not then you are good to go. OK he may be good to go the groove is only 1/8" wide to add to the depth I posted earlier, will wait and see if there is any play. Any groove in the surface means it ain’t good to go.
Eat. Sleep. Fish.
|
|
|
Re: Damaged trailer spindle question?
[Re: SteezMacQueen]
#14342821
04/13/22 06:45 PM
|
Joined: May 2002
Posts: 5,037
leethefishking
TFF Celebrity
|
|
TFF Celebrity
Joined: May 2002
Posts: 5,037 |
The bearings rest around the entire spindle. Clean the gouge with an Emory cloth then seat a set of bearings on the spindle and see if there is any play. If not then you are good to go. OK he may be good to go the groove is only 1/8" wide to add to the depth I posted earlier, will wait and see if there is any play. Any groove in the surface means it ain’t good to go. Steez, I totally disagree and have thousands of miles of rebuilt hubs running to prove it. If your talking about the wear cup then it cant be grooved at all. But the wear cup is easily replaced. If your talking about the spindle surface and it’s only got one gouge in it, in my experience the bearings will seat on it just fine. You still have 95% of the mounting surface intact. This is case by case though and as always you can go to the trouble of putting on a new spindle but for most damage it’s not necessary.
|
|
|
Re: Damaged trailer spindle question?
[Re: Lone_Wolf]
#14342826
04/13/22 06:49 PM
|
Joined: Nov 2014
Posts: 23,400
SteezMacQueen
TFF Guru
|
|
TFF Guru
Joined: Nov 2014
Posts: 23,400 |
Talking about the bearing race….ain’t that what we are talking about?
Eat. Sleep. Fish.
|
|
|
Re: Damaged trailer spindle question?
[Re: SteezMacQueen]
#14342830
04/13/22 06:52 PM
|
Joined: May 2003
Posts: 16,307
Chris B
TFF Guru
|
|
TFF Guru
Joined: May 2003
Posts: 16,307 |
Talking about the bearing race….ain’t that what we are talking about? He’s talking about the spindle. As long as the groove isn’t where the seal rides it should be ok.
![[Linked Image]](https://texasfishingforum.com/forums/pics/usergals/2017/07/full-3769-170037-image.png) I hate photobucket.
|
|
|
Re: Damaged trailer spindle question?
[Re: leethefishking]
#14342906
04/13/22 08:47 PM
|
Joined: Jun 2017
Posts: 2,382
Lone_Wolf
OP
Extreme Angler
|
|
OP
Extreme Angler
Joined: Jun 2017
Posts: 2,382 |
The bearings rest around the entire spindle. Clean the gouge with an Emory cloth then seat a set of bearings on the spindle and see if there is any play. If not then you are good to go. OK he may be good to go the groove is only 1/8" wide to add to the depth I posted earlier, will wait and see if there is any play. Any groove in the surface means it ain’t good to go. Steez, I totally disagree and have thousands of miles of rebuilt hubs running to prove it. If your talking about the wear cup then it cant be grooved at all. But the wear cup is easily replaced. If your talking about the spindle surface and it’s only got one gouge in it, in my experience the bearings will seat on it just fine. You still have 95% of the mounting surface intact. This is case by case though and as always you can go to the trouble of putting on a new spindle but for most damage it’s not necessary. yeah the wear cup is shot, that part will have to be replaced.
|
|
|
Re: Damaged trailer spindle question?
[Re: leethefishking]
#14343854
04/14/22 09:37 PM
|
Joined: Dec 2005
Posts: 4,032
ogles824 (aka Lakewaydr50)
TFF Team Angler
|
|
TFF Team Angler
Joined: Dec 2005
Posts: 4,032 |
The bearings rest around the entire spindle. Clean the gouge with an Emory cloth then seat a set of bearings on the spindle and see if there is any play. If not then you are good to go. This.....
2012 ZX200 Skeeter 2012 Yamaha 200 SHO Isaiah 40:31 "but those who hope in the Lord will renew their strength. They will soar on wings like eagles, they will run and not grow weary, they will walk and not be faint. Proud student of the Pro Staffer. https://www.youtube.com/watch?v=TzwF72B2F2w&t=14s
|
|
Moderated by banker-always fishing, chickenman, Derek 🐝, Duck_Hunter, Fish Killer, J-2, Jacob, Jons3825, JustWingem, Nocona Brian, Toon-Troller, Uncle Zeek, Weekender1
|
