|
|
|
Forums59
Topics1,152,513
Posts15,743,010
Members143,054
| |
Most Online36,273
Jan 23rd, 2013
|
|
 Remove epoxied transducer from hull
#14097417
08/16/21 10:07 PM
|
Joined: Oct 2016
Posts: 334
~Moose~
OP
Angler
|
|
OP
Angler
Joined: Oct 2016
Posts: 334 |
Any ideas how to remove this old epoxied transducer before I start a serious dismantle of my boat? Pictures don’t do justice for how deep this thing is buried in there. ![[Linked Image]](https://texasfishingforum.com/forums/pics/userpics/2021/08/full-103328-107543-63abeaf3_f556_4f9b_87d0_aac10e165047.jpeg) ![[Linked Image]](https://texasfishingforum.com/forums/pics/userpics/2021/08/full-103328-107544-0a79e1a5_3b6b_4396_b704_32df7fff20eb.png)
|
|
 Re: Remove epoxied transducer from hull
[Re: ~Moose~]
#14097418
08/16/21 10:08 PM
|
Joined: Oct 2007
Posts: 19,730
Huckleberry
TFF Guru
|
|
TFF Guru
Joined: Oct 2007
Posts: 19,730 |
why remove it? Just abandon it.
|
|
|
Re: Remove epoxied transducer from hull
[Re: ~Moose~]
#14097438
08/16/21 10:22 PM
|
Joined: Aug 2002
Posts: 2,020
DLALLDER
Extreme Angler
|
|
Extreme Angler
Joined: Aug 2002
Posts: 2,020 |
Expoxy is very strong in some ways but weak in others. If you can get a piece of wood on it and can get a blow with a hammer in a side way manner it may just pop loose. I have taken several out by striking the xducer as though you were going to slide it to one side by using a piece of wood and a hammer.
|
|
|
Re: Remove epoxied transducer from hull
[Re: ~Moose~]
#14097439
08/16/21 10:22 PM
|
Joined: Aug 2002
Posts: 2,020
DLALLDER
Extreme Angler
|
|
Extreme Angler
Joined: Aug 2002
Posts: 2,020 |
Expoxy is very strong in some ways but weak in others. If you can get a piece of wood on it and can get a blow with a hammer in a side way manner it may just pop loose. I have taken several out by striking the xducer as though you were going to slide it to one side by using a piece of wood and a hammer.
|
|
|
Re: Remove epoxied transducer from hull
[Re: Huckleberry]
#14097947
08/17/21 12:09 PM
|
Joined: Oct 2016
Posts: 334
~Moose~
OP
Angler
|
|
OP
Angler
Joined: Oct 2016
Posts: 334 |
why remove it? Just abandon it. No idea why this didnt cross my mind..... 
|
|
|
Re: Remove epoxied transducer from hull
[Re: DLALLDER]
#14097951
08/17/21 12:13 PM
|
Joined: Oct 2016
Posts: 334
~Moose~
OP
Angler
|
|
OP
Angler
Joined: Oct 2016
Posts: 334 |
Expoxy is very strong in some ways but weak in others. If you can get a piece of wood on it and can get a blow with a hammer in a side way manner it may just pop loose. I have taken several out by striking the xducer as though you were going to slide it to one side by using a piece of wood and a hammer. I sort of tried this for a while. I cant get a good enough angle on it the way it is buried down in there without removing a ton of wiring, batteries, charger and maybe even power-pole pumps. I think I am going with the abandon it approach. Thanks for the input though!
|
|
|
|
|
|
