I got green blinking light on black box. It’s telling the right depth. Display is just messed up.



Trying to upload video..

turn it off and on a couple times

Oh my, what on earth will you do if you don't have Livescope working, will you still fish?

I have done that. And connected and unconnected all the cables, and I get another error every time I do, so seems that is not the issue.

No, it’s like fishing blind. Guess I’m gonna go home.

Messed up display.

Maybe the unit is too hot?

It never did work today, I was on the water with it turned on 8:30am, not that hot them. Plus I have umbrella.

Are you able to navigate through settings? If so, do a restore default. That can correct any glitch you may have encountered. If that does not correct the issue/s then a call to Garmin will be required...

Also, check the tab on the network adapter that plugs into the back of the graph. You know the tab that allows the cable to click into position. Make sure it is not missing.

Thanks David, I just did all that. Same error message. Per my first post/pictures, error message at the bottom you can only see half of it, but it says “Check network”. I’m thinking maybe my wiring needs to be redone. I’ll call garmin Monday.

Check your fuse. I went through hell trying to get mine working last year. I had a corroded fuse…

You can go on Bass Boat Central and ask for help on the Garmin forum. There are several Garmin pro staff that will try to help. I have found it very helpful and you usually don't get the smart ??? comments like the two above gave you.

Kill the power to the unit for 5mins then re-power.... Hard reset....

Craze,

I agree with Cameron. The fuse holder caused me nightmares

Checked 2 of the fuses yesterday on the boat, might have to check gain. I'm just gonna call garmin in the morning. I don't fish again till next Saturday, so got a week to figure this out.