Confused About Y-Cable

Confused About Y-Cable #14029584 06/12/21 03:16 PM
Joined: Mar 2015 Posts: 50 H hurtinee04 OP Outdoorsman
OP hurtinee04 Outdoorsman H Joined: Mar 2015 Posts: 50	I am trying to figure out which y cable to use with a mega 360 and helix 12 g4n msi so I can have mdi. This is with the external transducer mounted on non link ultrex. Last edited by hurtinee04; 06/12/21 03:18 PM.

Re: Confused About Y-Cable [Re: hurtinee04] #14029780 06/12/21 07:34 PM
Joined: Nov 2010 Posts: 4,994 Charlottesville, Va W Wayne P. TFF Team Angler
Wayne P. TFF Team Angler W Joined: Nov 2010 Posts: 4,994 Charlottesville, Va	You need the 9 M360 2DDI Y cable. It has the female 14-pin plug for the MEGA 360, a female 7-pin plug for the Humminbird transducer and the male 7-pin plug for the display connection. Makes no difference if you use a MSI+ or MDI+ transducer on the trolling motor, you will only get 2D/DI/Temp from it using the Y cable. Helix 12 CHIRP MEGA SI+ GPS G3N and G4N, 1198c SI, SOLIX 10 SI G3, Helix 10 MEGA DI+ GPS G3N, SOLIX 12 SI and G3, MEGA 360, MEGA LIVE TL, RC-1

Re: Confused About Y-Cable [Re: hurtinee04] #14030135 06/13/21 02:37 AM
Joined: Mar 2015 Posts: 50 H hurtinee04 OP Outdoorsman
OP hurtinee04 Outdoorsman H Joined: Mar 2015 Posts: 50	Thanks Wayne you are the man.

Hop To