Could not fish Saturday since the wind was a bit much for my liking, so I decided to mod my boat a bit to better organize the storage I have. As you can see from the pictures I have a before and two afters where I put some aluminum rails in place that are spaced just wide enough to hold some baskets I bought. It allows me to slide the baskets back and forth to get to any items I have below them. Here i am able to keep the stuff I have to access most often, like baits, scale, pliers etc... Normally when I am retying I like to sit on the center cover, and when the stuff I need is in there I have to pull everything out close the cover, sit down retie.. and then when I am done put everything back. This way I am able to sit down, open the side cover and I have access to everything I need for my most common set ups.
Really cheap project, simple assembly and I love having the ease of access to the things I use most. I also didn't like, that in most of my compartments, I use the bottom of the space only, while the top of the space is wasted unless you stack which I do not like to do. This is a win win all the way around.
![[Linked Image]](https://texasfishingforum.com/forums/pics/userpics/2021/05/full-30092-95898-20210508_150208.jpg)
![[Linked Image]](https://texasfishingforum.com/forums/pics/userpics/2021/05/full-30092-95896-20210509_093732.jpg)
![[Linked Image]](https://texasfishingforum.com/forums/pics/userpics/2021/05/full-30092-95897-20210509_093721.jpg)