|
Forums59
Topics1,038,941
Posts13,955,962
Members144,183
| |
Most Online39,925
Dec 30th, 2023
|
|
 Motor Guide tour pro trolling motor
#13930733
03/21/21 01:17 PM
|
Joined: Mar 2021
Posts: 4
Kwines
OP
Green Horn
|
|
OP
Green Horn
Joined: Mar 2021
Posts: 4 |
I mounted a motor guide tour pro on my boat. It is very hard to latch in place. When it latches in, it takes a screw driver to release it. The handle won't release it. The motor is not binding with the front of boat
.
|
|
|
Re: Motor Guide tour pro trolling motor
[Re: Kwines]
#13930746
03/21/21 01:30 PM
|
Joined: Mar 2010
Posts: 25,798
T Bird
TFF Guru
|
|
TFF Guru
Joined: Mar 2010
Posts: 25,798 |
Push down on the head of the TM while pulling the release handle/rope. Mine was the same way. After a year or two of use the release latch will wear/loosen enough that pushing down on the head will no longer be needed.
Okie by birth, Texan by choice. ![[Linked Image]](https://texasfishingforum.com/forums/pics/userpics/2021/01/full-47849-80883-111.jpg) USAF "Thunderbirds" Alumni 1985-1989
|
|
|
Re: Motor Guide tour pro trolling motor
[Re: T Bird]
#13930811
03/21/21 02:14 PM
|
Joined: Mar 2021
Posts: 4
Kwines
OP
Green Horn
|
|
OP
Green Horn
Joined: Mar 2021
Posts: 4 |
Thanks. I'll give it a try. It is difficult to test at home because of trailet hitch. I tried
|
|
|
Re: Motor Guide tour pro trolling motor
[Re: Kwines]
#13935645
03/25/21 05:05 AM
|
Joined: Dec 2003
Posts: 36,285
Allison1
TFF Guru
|
|
TFF Guru
Joined: Dec 2003
Posts: 36,285 |
That may have happened because the trolling motor was not mounted flat and the frame is slightly torqued.
Release the tension on a couple of the screws and see if it is still tough to latch.
|
|
|
Re: Motor Guide tour pro trolling motor
[Re: Kwines]
#13935732
03/25/21 11:51 AM
|
Joined: Sep 2003
Posts: 1,889
Coolarrow
Extreme Angler
|
|
Extreme Angler
Joined: Sep 2003
Posts: 1,889 |
I grab the release rope and use my foot to apply just a little down pressure on the motor. The latch pops loose very easy then. It has seamed to get better as I have used it.
|
|
|
Re: Motor Guide tour pro trolling motor
[Re: Coolarrow]
#13939932
03/29/21 01:20 AM
|
Joined: Mar 2021
Posts: 4
Kwines
OP
Green Horn
|
|
OP
Green Horn
Joined: Mar 2021
Posts: 4 |
It turned out there are a couple of plastic bushimgs in the top part of the motor. One of the was sticking and not turned properly. We adjusted it and it works correctly now. Now I'm having some problems withe the remote. When trying to turn right. It starts to jerk and will go back left. Not as bad with the foot control
|
|
Moderated by banker-always fishing, chickenman, Derek 🐝, Duck_Hunter, Fish Killer, J-2, Jacob, Jons3825, JustWingem, Nocona Brian, Toon-Troller, Uncle Zeek, Weekender1
|
