|
Forums59
Topics1,031,786
Posts13,823,376
Members143,879
| |
Most Online36,273
Jan 23rd, 2013
|
|
 Installing transducer question
#13915300
03/08/21 08:25 PM
|
Joined: Dec 2015
Posts: 644
TxRanger1
OP
Pro Angler
|
|
OP
Pro Angler
Joined: Dec 2015
Posts: 644 |
I am going to install a 2D transducer down in the sump inside the boat at the back. What are you guys using to mount this thing down? I would assume that some kind of epoxy but not sure which one.
Thanks
|
|
|
Re: Installing transducer question
[Re: TxRanger1]
#13915423
03/08/21 10:10 PM
|
Joined: Dec 2006
Posts: 3,287
Dayne
TFF Team Angler
|
|
TFF Team Angler
Joined: Dec 2006
Posts: 3,287 |
A 2 part slow curing epoxy is what I have always used.
|
|
|
Re: Installing transducer question
[Re: TxRanger1]
#13915509
03/08/21 11:33 PM
|
Joined: Aug 2010
Posts: 620
FlyFX
Pro Angler
|
|
Pro Angler
Joined: Aug 2010
Posts: 620 |
when putting one on a kayak I was instructed to make sure "no bubbles" in epoxy.
Most people double haul so they can throw their mistakes further - Bernard "Lefty" Kreh - R.I.P.
Glass rod, click & pawl, ugly flies
|
|
|
Re: Installing transducer question
[Re: TxRanger1]
#13915544
03/08/21 11:57 PM
|
Joined: Nov 2014
Posts: 21,867
SteezMacQueen
TFF Guru
|
|
TFF Guru
Joined: Nov 2014
Posts: 21,867 |
I used two part JBWeld epoxy. Slow curing. Make a good size puddle and push, squish, wiggle the transducer down. The slow curing will help to eliminate bubbles. You want zero bubbles. The air trapped in them will make the transducer lose effectiveness.
Eat. Sleep. Fish.
|
|
|
Re: Installing transducer question
[Re: TxRanger1]
#13920194
03/12/21 03:20 PM
|
Joined: Aug 2002
Posts: 2,038
DLALLDER
Extreme Angler
|
|
Extreme Angler
Joined: Aug 2002
Posts: 2,038 |
Been many years since I installed a xducer but if it is a Lowrance back then they furnished the recommended epoxy.
|
|
|
Re: Installing transducer question
[Re: TxRanger1]
#13925778
03/17/21 12:15 PM
|
Joined: Apr 2004
Posts: 13,480
Stump jumper
TFF Guru
|
|
TFF Guru
Joined: Apr 2004
Posts: 13,480 |
I have mounted several using PC7 epoxy. It is a putty type and not as prone to air bubbles. Whatever you use stir it slowly. The expoxy that Lowrance use to supply is also a putty.
2200 Bay Champ/200 Mercury Optimax
2017 Tundra TSS 4x4 Crewmax 5.7L
|
|
Moderated by banker-always fishing, chickenman, Derek 🐝, Duck_Hunter, Fish Killer, J-2, Jacob, Jons3825, JustWingem, Nocona Brian, Toon-Troller, Uncle Zeek, Weekender1
|
