How is the wireless/cableless pedal>?
Is there any complaints from people that have them?
I am looking at buy all Garmin electronics and trolling motor. Force, 93 and a 1022, livescope, Want sonar, down and side imaging and to follow waypoint and contours on the trolling motor on the 1022 or the 93 not sure which one on the bow yetj. Want the 93 or 1022 at the helm, with sonar, with side and down imaging with mount for jackplate. And want the 1022 and 93 linked so the partner in the back can see what I am seeing off the trolling motor.
Is there anybody here with the knowldge of want the hell I exactly need for this to perform like this? And what would the exact model numbers are for the trolling motor, 1022 and 93, Livescope, transducers and what cables. Really need some help as I do not want to buy to much/more than I need nor do I want to have to keep ordering or exchanging stuff because I bought the wrong stuff.
Not the sharpest pencil out there when it comes to electronics.
Thanks for all the help.

Hey Les, the garmin 1022 is a unit you can’t hook any 2d or downscan transducers up to. You would almost exclusively have to put that on the bow if u went with that unit. They built that unit strictly for livescope. I don’t think it will take anything else other than that. If u want a 10” screen that will have regular sonar, their downscan, and livescope look at the 102 or the 106 models.

Ok Thanks, then it would be the 102 model or maybe I will just go with 2 - 93's to simplify everything.

If you add a transducer to the 1022, it becomes a 1042. However it will not link with Echomaps. Must have GPSmap to GPSmap or Echomap to Echomap. Cannot cross link.So the 102 or 106 would be a good choice. At present there are only two trolling motors; 57" or 50". 50" is good for most bass boats. I love the wireless foot pedal. There have been a few issues but I think they are mostly worked out.

Retired grass grower

I have the force 57", 93sv+ on bow and console for maps/di/si/chirp sonar, 92sv (no ducer with it) for livescope, livescope with its ducer mounted on the tm shaft (there is a notch it fits in perfect. look under the strap on tm and you can barely see the ducer.

95 champion 202

like said, no gpsmap unit, get the

ECHOMAP™ Ultra 106sv
With GT56UHD-TM Transducer
PART NUMBER 010-02527-01
$
2,099.99
USD

for a 10" that does what you want.

I have not networked mine together yet but I think these are the cables for the echomap units. I plan on linking my console and bow units soon.

https://buy.garmin.com/en-US/US/p/567153/pn/010-12528-01

another thing, the trolling motor comes with di/si/chirp ducer on it, no need to buy a unit with the ducer for bow unit.

when you calibrate the compass in the tm you have to do a 360 with the boat, do it very slowly and you get a lot better results.

get the active capt. app on the phone and download any updates, install equip and do all updates before using, in particular the trolling motor.
all links with built in wifi so it is super easy but can take some time.

Ya I found that out on Contours it does not have. But you can map your trails and it will follow them.
Pulled the trigger yesterday. 2- 106sv-ultra, Livescope, Garmin Force, Wire upgrade, cables, Linked, install, etc.
Hope we are happy with this and it works flawlessly.