texasfishingforum.com logo
Main Menu
Newest Members
schtj5, Just joking, RexLund, Tmag109, Chance Nabarrette
114117 Registered Users
Top Posters(All Time)
TexDawg 98,643
Pilothawk 80,531
John175☮ 77,882
Bigbob_FTW 69,006
JDavis7873 67,400
Derek 🐝 65,519
Mark Perry 61,382
Tritonman 59,010
Forum Statistics
Most Online36,273
Jan 23rd, 2013
Print Thread
Mounting HDS Live flush mount issue #13775704 11/18/20 07:04 PM
Joined: Sep 2003
Posts: 987
rkd Online Content OP
Pro Angler
OP Online Content
Pro Angler
Joined: Sep 2003
Posts: 987
Thought I would post this in the electronics section since I'm not getting any responses in the bass section.

I have a Lowrance Live 9 unit that is replacing a Gen 3 9 inch unit. The Live unit is about a half inch wider on each side and it won't fit the flushmount faceplate that my Gen 3 was mounted to. The faceplate is steel or aluminum and about 1/8 inch thick. I don't have the tools to cut the plate. And this will also require 4 new screw holes be drilled. Is there any place in North Dallas area I can take it to have the work done? David at Shut Up and Fish did an EXCELLENT job with my first Live 9 unit (including the wiring) but he's out for a few weeks and I'd like to get this done ASAP. I have a tournament this weekend. No wiring necessary this time around. I would like to keep the original faceplate as it fits flush to the bow of my boat perfectly.

Re: Mounting HDS Live flush mount issue [Re: rkd] #13776762 11/19/20 02:19 PM
Joined: Oct 2005
Posts: 862
Rob Jasper Lowrance Pro-Staff Online Content
Pro Angler
Online Content
Pro Angler
Joined: Oct 2005
Posts: 862
I bought a dremel tool and cut both the aluminum and some fiberglass on my Ranger going from Carbon to Live. I had to re-drill the four holes as well. A good boat dealership that installs electronics might be able to help.

Rob Jasper
Previous Thread
Next Thread

Moderated by  Duck_Hunter 

© 1998-2019 OUTDOOR SITES NETWORK all rights reserved USA and Worldwide
Powered by UBB.threads™ PHP Forum Software 7.7.3