texasfishingforum.com logo
Main Menu
Advertisement
Affiliates
Advertisement
Newest Members
Tecman, Kolton12211993, TFonzy, Fisher6969, Wxzy
113772 Registered Users
Top Posters(All Time)
TexDawg 97,111
hopalong 89,781
Pilothawk 80,193
John175☮ 77,777
JDavis7873 67,400
Bigbob_FTW 67,162
Derek 🐝 64,941
Mark Perry 60,731
Tritonman 58,986
facebook
Forum Statistics
Forums62
Topics780,635
Posts9,905,553
Members113,772
Most Online36,273
Jan 23rd, 2013
Print Thread
Page 1 of 2 1 2
150 XR6 Oil Beeper #13675243 08/21/20 03:12 AM
Joined: Apr 2017
Posts: 8,109
BCBassCat Online Content OP
TFF Celebrity
OP Online Content
TFF Celebrity
Joined: Apr 2017
Posts: 8,109
Can’t make it stop, if I’m trimmed level and not rocking too bad it’ll stop. Been fighting this for some time. I can tell oil is getting there, just not enough to keep the float up. Found this tee like this. Can’t find any hoses not connected. What am I missing?

[Linked Image]

Re: 150 XR6 Oil Beeper [Re: BCBassCat] #13675493 08/21/20 01:11 PM
Joined: Nov 2006
Posts: 2,642
T
TLW Offline
Extreme Angler
Offline
Extreme Angler
T
Joined: Nov 2006
Posts: 2,642
that fittin' is ok.. its a pressure relief valve... if tha motor tank is not stayin' full ya might wanna check main tank for any kinda "pressure leak".. could be cap, cap gasket, cracked hose etc... also tha fitting under tha starter that pressurizes tha tank may be gettin' a little weak. thats some startin' place's anyway.... jmo

Last edited by TLW; 08/21/20 01:11 PM.
Re: 150 XR6 Oil Beeper [Re: BCBassCat] #13675517 08/21/20 01:29 PM
Joined: Apr 2017
Posts: 8,109
BCBassCat Online Content OP
TFF Celebrity
OP Online Content
TFF Celebrity
Joined: Apr 2017
Posts: 8,109
Thanks for input. I've checked, cleaned and double checked the fill top for the in hull reservoir. I guess I will need to unhook it and pull it out.

Re: 150 XR6 Oil Beeper [Re: BCBassCat] #13675687 08/21/20 04:02 PM
Joined: Nov 2007
Posts: 4,316
ssmith Offline
TFF Team Angler
Offline
TFF Team Angler
Joined: Nov 2007
Posts: 4,316
pull the pickup tube out of the oil tank in the boat sometimes the screen on the bottom gets stopped up an wont let enough oil thru it to go to the tank on the motor.

Re: 150 XR6 Oil Beeper [Re: ssmith] #13675778 08/21/20 05:35 PM
Joined: Apr 2017
Posts: 8,109
BCBassCat Online Content OP
TFF Celebrity
OP Online Content
TFF Celebrity
Joined: Apr 2017
Posts: 8,109
Originally Posted by ssmith
pull the pickup tube out of the oil tank in the boat sometimes the screen on the bottom gets stopped up an wont let enough oil thru it to go to the tank on the motor.


That's excellent info right there. I will do this tomorrow and report back. If that's all it is I owe you a cold beverage or 4...

Re: 150 XR6 Oil Beeper [Re: BCBassCat] #13677114 08/22/20 10:04 PM
Joined: Apr 2017
Posts: 8,109
BCBassCat Online Content OP
TFF Celebrity
OP Online Content
TFF Celebrity
Joined: Apr 2017
Posts: 8,109
Cleaned pickup tube screen. It was pretty dirty. Took the boat and it’s still staying below the float. Tomorrow I’m going to pull the tank out and check everything real good, might try to blow hoses out...

Re: 150 XR6 Oil Beeper [Re: BCBassCat] #13677374 08/23/20 03:02 AM
Joined: Aug 2008
Posts: 71
O
officialfish Offline
Outdoorsman
Offline
Outdoorsman
O
Joined: Aug 2008
Posts: 71
Check cap on the motor oil resivor turn motor on and just cracked it open might relieve pressure

Re: 150 XR6 Oil Beeper [Re: BCBassCat] #13677450 08/23/20 05:04 AM
Joined: Sep 2005
Posts: 118
I
imarangerman Offline
Outdoorsman
Offline
Outdoorsman
I
Joined: Sep 2005
Posts: 118
Been having same problem for months. Let me know what you figure out please
Same engine

Last edited by imarangerman; 08/23/20 04:32 PM.
Re: 150 XR6 Oil Beeper [Re: BCBassCat] #13677464 08/23/20 06:00 AM
Joined: Nov 2006
Posts: 2,642
T
TLW Offline
Extreme Angler
Offline
Extreme Angler
T
Joined: Nov 2006
Posts: 2,642
if ya don't find anything there replace tha valve below tha starter or at least check it and give it good cleaning.. make sure its still working.............

Re: 150 XR6 Oil Beeper [Re: BCBassCat] #13677696 08/23/20 02:50 PM
Joined: Jul 2010
Posts: 964
B
boatman025 Offline
Pro Angler
Offline
Pro Angler
B
Joined: Jul 2010
Posts: 964
check oil cap and check hose you show in picture


Hughes Marine
3855 Osage Lane
Wylie ,Texas
Re: 150 XR6 Oil Beeper [Re: BCBassCat] #13678240 08/24/20 12:53 AM
Joined: Apr 2017
Posts: 8,109
BCBassCat Online Content OP
TFF Celebrity
OP Online Content
TFF Celebrity
Joined: Apr 2017
Posts: 8,109
Checked all caps and pick up tube again, everything looked good. So I pulled the fill hose and put it in a container. Used my compressor to apply some pressure and got flow. There might have been a restriction but not sure. Based on what I see below the starter where the pressure is generated its going to be difficult to replace that part as I don’t see how it can be removed

[Linked Image]
[Linked Image]

Re: 150 XR6 Oil Beeper [Re: BCBassCat] #13678291 08/24/20 02:20 AM
Joined: Nov 2007
Posts: 4,316
ssmith Offline
TFF Team Angler
Offline
TFF Team Angler
Joined: Nov 2007
Posts: 4,316
it screws into the block pull it out it has a check valve make sure you cant blow back thru it that is where your pressure comes from to fill the tank on the motor.

Re: 150 XR6 Oil Beeper [Re: BCBassCat] #13678305 08/24/20 02:38 AM
Joined: Apr 2017
Posts: 8,109
BCBassCat Online Content OP
TFF Celebrity
OP Online Content
TFF Celebrity
Joined: Apr 2017
Posts: 8,109
Ok I did see where it’s a hex with threads on it, after I posted. I will pull it tomorrow.

Re: 150 XR6 Oil Beeper [Re: BCBassCat] #13680425 08/25/20 11:49 PM
Joined: Apr 2017
Posts: 8,109
BCBassCat Online Content OP
TFF Celebrity
OP Online Content
TFF Celebrity
Joined: Apr 2017
Posts: 8,109
Pulled check. It does have a screen. Not anything there. Blow through check both directions, and even when it does seal it doesn’t seal very well. I think I found the problem!

[Linked Image]

Re: 150 XR6 Oil Beeper [Re: BCBassCat] #13680473 08/26/20 12:23 AM
Joined: Nov 2007
Posts: 4,316
ssmith Offline
TFF Team Angler
Offline
TFF Team Angler
Joined: Nov 2007
Posts: 4,316
replace that it should work like a champ.

Page 1 of 2 1 2
Previous Thread
Index
Next Thread


© 1998-2019 OUTDOOR SITES NETWORK all rights reserved USA and Worldwide
Powered by UBB.threads™ PHP Forum Software 7.7.3