I will be out at the Bass Pro this Saturday working for Lowrance from 10:15-1:45. Come out if I can help with operations, set-up, software updates or information about upgrading your electronics. We can also talk about the new GHOST trolling motor. I will be at the Bass Pro this Saturday, Aug 15 & again on Aug 29th.

a suggestion , please pass up the chain,

when using spot lock anchor , waypoint , it would be nice for the waypoints to be listed by nearest.

In the waypoint management screen , there is an option , but changing this doen't help on the anchor screen.

hds gen 3 and elite ti2 both suffer from this flaw. I currently have over 150 active waypoints, It is a pain
to scroll that far to fish #153.

thanks for all your help, I truly appreciate it.
MO

Thanks for the suggestion. You can also bring up the charts page (with menu showing), tap on the waypoint you want to go to and select GO TO.
I will pass this upline, thanks. FYI- I will be back out at Bass Pro Saturday, Aug 29.

yes , I tried that , evidently some setting is wrong , the boat went to the waypoint, did not stop , just stayed on the heading.

I did learn something this weekend, When I go to anchor screen , hit anchor , waypoint, and use the up button , it goes from waypoint 1 to the
highest numbered waypoint ( in the 170's for me ) this is easier for those high numbers.

Thanks again
MO

You do have a setting you can turn on for the Ghost to Anchor Lock when it hits the destination you have chosen to navigate to.

Motor guide xi5


Should be a setting, will look next time on the water, I’ve had this set up for awhile, still learning




Thanks

Mo

Mo, lets let this post die due to title not fitting. I could not figure a way to delete the post or change title. I will be back out at BPS - Grapevine this Saturday - 8/29 from 10:30-1:30 if you are in the area.