What psi are you guys running on the newer style Skeeter trailers? The tire says 50psi max but I’m being told to run 42-45psi. I’ve also been told to run 50psi.

50

48-50

Max PSI at all times

Max PSI. Run them at 50.

Max psi, check them frequently. Keep all the psi's as close as possible.

Yeah, 50 psi (if thats whats on the tire) Don't have a skeeter but that dont matter. I do have hundreds of hrs on rv forums and pulling rv's and some time with boat trailers. I have never ever heard advise to run tires that low. Always full psi.

I run mine 5 under max. I tow at 75 often

If you stay 65 or under max would be good

But theyll gain 5 psi going down the road and more above 65 mph.

I was told the same , Max PSI .
In addition , I run a simple $20 I/R gun with me and check both sidewall temps and hub temps --- .
If my tires are running a little lower than Max PSI , my side walls heat up more than normal . I am assuming the higher temps are not good for the tire itself and
checking my hubs is a little proactive measure to look for early signs of bearing failure .

I run mine at 50.

I had one of the tires patched this afternoon at a tire shop and the guy there put 42psi in the tire. I told him that I run them that 50. Hecsaid that when they get hot I’m going to be exceeding the max psi. He said he would put it at 45 but if I wanted to run them at 50 I could put it there on my own. Just making sure I wasn’t making a mistake running them at 50.

Your tire shop guy is an idiot

Goodyear always recommended adding 10 extra psi if you run over 65.

Max PSI on my Endurance is 65 and thats where I run them. Tow at 75-80mph all the time with no issues in 3 years with em.

Look for the trailer placard close to the front right/ starboard of trailer it will have vin number, along with tire size AND recommended tire pressure for those specific tires.