Need some help or direction on this one. I have an older Minn Kota Maxxum 74 3X bow mount that needs to have the upper spring sleeve replaced. I have the part, but I can't find anything on replacing it.

Don't know if I take the control head off or the motor off first. Also concerned about the spring housing and the preload on the spring.

It's a bushing that goes just above the spring inside the housing.

Am trying to avoid having to pay someone to do this and have the motor tied up for a while.

Attached Files Spring Sleeve.jpg
Last edited by TXBoss; 07/19/20 05:11 PM.

"Good judgment comes from experience, and a lot of that comes from bad judgment..." - W. Rogers