Forums59
Topics1,037,807
Posts13,934,808
Members144,150
|
Most Online39,925 Dec 30th, 2023
|
|
NMEA/Ethernet
#13591929
06/12/20 12:27 AM
|
Joined: Feb 2009
Posts: 730
n_fish
OP
Pro Angler
|
OP
Pro Angler
Joined: Feb 2009
Posts: 730 |
I have (2) HDS 12 GEN3, 1 at the console and 1 on the bow. My console unit has a lake chip and a micro SD card with trails and waypoints. I have a Nema network set-up with an Ethernet cable between both graphs. Problem is the unit at the bow with not display the lake map,waypoints, or trails. Any idea what the issue might be. Any tips would be much appreciated.
Thanks
|
|
Re: NMEA/Ethernet
[Re: n_fish]
#13592156
06/12/20 05:37 AM
|
Joined: Feb 2015
Posts: 4,724
Flippin-Out
TFF Team Angler
|
TFF Team Angler
Joined: Feb 2015
Posts: 4,724 |
Yes, it starts with not reading the manual or going through the settings on the unit. The manual is clear that if you want to use something other than the map embedded in the unit, you must select that map source in the unit's configuration settings. While the units are very capable, they can't read your mind to determine which map you want to see, so you must make that selection.
|
|
Re: NMEA/Ethernet
[Re: Flippin-Out]
#13592172
06/12/20 09:43 AM
|
Joined: Feb 2009
Posts: 730
n_fish
OP
Pro Angler
|
OP
Pro Angler
Joined: Feb 2009
Posts: 730 |
|
|
Re: NMEA/Ethernet
[Re: n_fish]
#13597879
06/17/20 11:59 AM
|
Joined: Jul 2009
Posts: 1,136
Skunked Again Fishing
Extreme Angler
|
Extreme Angler
Joined: Jul 2009
Posts: 1,136 |
I have (2) HDS 12 GEN3, 1 at the console and 1 on the bow. My console unit has a lake chip and a micro SD card with trails and waypoints. I have a Nema network set-up with an Ethernet cable between both graphs. Problem is the unit at the bow with not display the lake map,waypoints, or trails. Any idea what the issue might be. Any tips would be much appreciated.
Thanks When I ran the same setup (not anymore), I was able to see the graph on both. I believe I had to go into the other unit's setttings and tell it which map you want to use. As long as your network is configured correctly, it should show up as a map option alongside the basic map that's loaded. Tim
|
|
Re: NMEA/Ethernet
[Re: Skunked Again Fishing]
#13597903
06/17/20 12:17 PM
|
Joined: Feb 2015
Posts: 4,724
Flippin-Out
TFF Team Angler
|
TFF Team Angler
Joined: Feb 2015
Posts: 4,724 |
I have (2) HDS 12 GEN3, 1 at the console and 1 on the bow. My console unit has a lake chip and a micro SD card with trails and waypoints. I have a Nema network set-up with an Ethernet cable between both graphs. Problem is the unit at the bow with not display the lake map,waypoints, or trails. Any idea what the issue might be. Any tips would be much appreciated.
Thanks When I ran the same setup (not anymore), I was able to see the graph on both. I believe I had to go into the other unit's setttings and tell it which map you want to use. As long as your network is configured correctly, it should show up as a map option alongside the basic map that's loaded. Tim I guess you did not read my reply from 5 days ago that said the same thing? Not sure what you're adding.
|
|
Re: NMEA/Ethernet
[Re: Flippin-Out]
#13599252
06/18/20 09:43 AM
|
Joined: Jul 2009
Posts: 1,136
Skunked Again Fishing
Extreme Angler
|
Extreme Angler
Joined: Jul 2009
Posts: 1,136 |
I have (2) HDS 12 GEN3, 1 at the console and 1 on the bow. My console unit has a lake chip and a micro SD card with trails and waypoints. I have a Nema network set-up with an Ethernet cable between both graphs. Problem is the unit at the bow with not display the lake map,waypoints, or trails. Any idea what the issue might be. Any tips would be much appreciated.
Thanks When I ran the same setup (not anymore), I was able to see the graph on both. I believe I had to go into the other unit's setttings and tell it which map you want to use. As long as your network is configured correctly, it should show up as a map option alongside the basic map that's loaded. Tim I guess you did not read my reply from 5 days ago that said the same thing? Not sure what you're adding. I stopped reading it when it started with "read the manual"....
|
|
Re: NMEA/Ethernet
[Re: Skunked Again Fishing]
#13599350
06/18/20 12:28 PM
|
Joined: Dec 2008
Posts: 16,026
grout-scout
TFF Guru
|
TFF Guru
Joined: Dec 2008
Posts: 16,026 |
I have (2) HDS 12 GEN3, 1 at the console and 1 on the bow. My console unit has a lake chip and a micro SD card with trails and waypoints. I have a Nema network set-up with an Ethernet cable between both graphs. Problem is the unit at the bow with not display the lake map,waypoints, or trails. Any idea what the issue might be. Any tips would be much appreciated.
Thanks When I ran the same setup (not anymore), I was able to see the graph on both. I believe I had to go into the other unit's setttings and tell it which map you want to use. As long as your network is configured correctly, it should show up as a map option alongside the basic map that's loaded. Tim I guess you did not read my reply from 5 days ago that said the same thing? Not sure what you're adding. I stopped reading it when it started with "read the manual".... Freaking hilarious, this is why I quit trying to help people here.
|
|
|