Elite 7 Chirp on console, LMS 332 on the bow. Both transducers mounted at rear of Lowe FS175. The transducer for the 332 has a busted bracket. Wondering is there a way to wire them where my sonar from the Elite 7 will display on the screen of the 332 up front? In other words... run just the Elite 7 Chirp but see the sonar from that unit displayed on the 332 screen. Cant find this addressed anywhere online.

For Sonar to be shown on two devices via one transducer, you would need both hooked together via Ethernet and your Elite 7 does not have ethernet along with not sure if that can be done with the old 332 technology. What kind of trolling motor do you have & does it have built in sonar transducer? You could put a sonar transducer on bottom of trolling motor & run up to your 332???

I think I may just run it to the trolling motor like you suggested. I'm not aware of the trolling motor having a built in transducer. That would be nice. I know it's the original Minn Kota that came on the boat from the factory.

You can tell my looking at your MK trolling motor. If it is not obvious then it does not have a built in ducer. You can buy a Lowrance transducer that is designed to be mounted on a TM. For the 332 just stay with cheap sonar & temp only ducer.

Thanks, TM is MinnKota Powerdrive 65PD w/foot pedal. Doesn't look like it has any of the bells and whistles.