Forums59
Topics1,039,128
Posts13,959,676
Members144,192
|
Most Online39,925 Dec 30th, 2023
|
|
LSS 1 problem
#13290371
09/23/19 10:07 AM
|
Joined: Apr 2009
Posts: 413
BassCat'99
OP
Angler
|
OP
Angler
Joined: Apr 2009
Posts: 413 |
Friends, I need a little help/direction here. This weekend I fished a bass tournament, really nice weather and temperature. So Saturday everything went fine, but on Sunday about midday my front graph started dropping my bottom/side scan showing "no source". This happened at least six times, go off and a little bit come back on. The graph on console never acted up. So this is what I have, HDS 8 gen 2 up front, HDS 10 gen 2 on console and a LSS 1. Checked connections on graph and LSS box, disconnected and reconnected, no change. What and where would you suggest I start with? What other info would you like/need?
1999 Pantera Classic 1999 Merc 200hp EFI
|
|
Re: LSS 1 problem
[Re: BassCat'99]
#13290417
09/23/19 11:49 AM
|
Joined: Dec 2006
Posts: 3,292
Dayne
TFF Team Angler
|
TFF Team Angler
Joined: Dec 2006
Posts: 3,292 |
I’d start with the ethernet cable. I’ve had some go bad.
|
|
Re: LSS 1 problem
[Re: BassCat'99]
#13290445
09/23/19 12:21 PM
|
Joined: Apr 2009
Posts: 413
BassCat'99
OP
Angler
|
OP
Angler
Joined: Apr 2009
Posts: 413 |
thanks Dayne, that would be the easiest to try first.
1999 Pantera Classic 1999 Merc 200hp EFI
|
|
Re: LSS 1 problem
[Re: Dayne]
#13292831
09/25/19 03:57 PM
|
Joined: Apr 2004
Posts: 14,082
Stump jumper
TFF Guru
|
TFF Guru
Joined: Apr 2004
Posts: 14,082 |
I’d start with the ethernet cable. I’ve had some go bad. +1, I had one go bad. Got the no source message. You may also have a loose connection on the power or trigger wire
2200 Bay Champ/200 Mercury Optimax 2017 Tundra TSS 4x4 Crewmax 5.7L
|
|
Re: LSS 1 problem
[Re: BassCat'99]
#13293483
09/26/19 11:10 AM
|
Joined: Nov 2002
Posts: 4,439
Gamblinman
TFF Team Angler
|
TFF Team Angler
Joined: Nov 2002
Posts: 4,439 |
As mentioned above...start with a good known Ethernet cable and try, and check all your connections. Make sure you're getting full voltage to the unit.
|
|
Re: LSS 1 problem
[Re: Gamblinman]
#13293810
09/26/19 05:23 PM
|
Joined: Apr 2004
Posts: 14,082
Stump jumper
TFF Guru
|
TFF Guru
Joined: Apr 2004
Posts: 14,082 |
As mentioned above...start with a good known Ethernet cable and try, and check all your connections. Make sure you're getting full voltage to the unit. Unit being the LSS box. The display on the HDS8 could reads the voltage to it.
2200 Bay Champ/200 Mercury Optimax 2017 Tundra TSS 4x4 Crewmax 5.7L
|
|
Re: LSS 1 problem
[Re: Stump jumper]
#13295484
09/28/19 01:42 AM
|
Joined: Nov 2002
Posts: 4,439
Gamblinman
TFF Team Angler
|
TFF Team Angler
Joined: Nov 2002
Posts: 4,439 |
As mentioned above...start with a good known Ethernet cable and try, and check all your connections. Make sure you're getting full voltage to the unit. Unit being the LSS box. The display on the HDS8 could reads the voltage to it. TY. yes, since either unit could be powered from a separate source.
|
|
|