texasfishingforum.com logo
Main Menu
Newest Members
CrappieK, Rory L, MrWipple, Sodbuster57, T21x
112008 Registered Users
Top Posters(All Time)
TexDawg 92,771
hopalong 83,581
Pilothawk 79,325
John175☮ 75,226
JDavis7873 67,398
Derek 🐝 63,707
Bigbob_FTW 62,027
Tritonman 58,834
Mark Perry 58,454
Forum Statistics
Most Online36,273
Jan 23rd, 2013
Print Thread
2013 Skeeter TZX wiring #13291840 09/24/19 07:08 PM
Joined: Mar 2014
Posts: 12
planotex Offline OP
Green Horn
OP Offline
Green Horn
Joined: Mar 2014
Posts: 12

I need to install a USB charger on console and spent some time trying to find a wiring diagram for 2013 TZX 170 Skeeter with F115 Yamaha (Internet, Plano Marine, etc.) with no success.
The problem is that this boat has no fuse panel and all relays are just hanging on the wiring ball of spaghetti under console. I need to find power wires which will be controlled by power cut-off switch on console.
The charger will consume up to 4.5 amp output so I want connect it right.

All diagrams I saw stated that I should look for Red (hot) and black (ground) wires, but it is not easy to locate them in this mix. Except for red coming to (and going further) power switch. But boat does not have easy ground like a car :-).

Any advice will be highly appreciated

Re: 2013 Skeeter TZX wiring [Re: planotex] #13292197 09/25/19 12:35 AM
Joined: Mar 2006
Posts: 1,016
javelin150 Offline
Extreme Angler
Extreme Angler
Joined: Mar 2006
Posts: 1,016
You could just run a 12 gauge pair of wires straight to the starting battery. Install an in line fuse holder close to the battery and you'll be done. A fish tape would make quick work of running the wires. You could even install a switch if you wanted to cut it off.

Previous Thread
Next Thread

© 1998-2019 OUTDOOR SITES NETWORK all rights reserved USA and Worldwide
Powered by UBB.threads™ PHP Forum Software 7.7.3