texasfishingforum.com logo
Main Menu
Advertisement
Affiliates
Advertisement
Newest Members
AtTheLake, biteandfightangler, acfgirl, Alan_a520, Wally Marshall
113397 Registered Users
Top Posters(All Time)
TexDawg 96,073
hopalong 88,260
Pilothawk 79,949
John175☮ 77,777
JDavis7873 67,400
Bigbob_FTW 65,915
Derek 🐝 64,505
Mark Perry 60,405
Tritonman 58,942
facebook
Forum Statistics
Forums62
Topics776,502
Posts9,846,472
Members113,397
Most Online36,273
Jan 23rd, 2013
Print Thread
1996 Skeeter Seat Bushings #13237091 08/06/19 03:15 AM
Joined: Aug 2004
Posts: 2,783
A
Allen Bass Fisher Offline OP
Extreme Angler
OP Offline
Extreme Angler
A
Joined: Aug 2004
Posts: 2,783
A friend of mine has a 1996 Skeeter 180 (I think). His front seat bushing is worn out and his seat "wobbles" quite a bit. Is this something that can be fixed/replaced? If so, how?

Re: 1996 Skeeter Seat Bushings [Re: Allen Bass Fisher] #13241190 08/08/19 11:41 PM
Joined: Aug 2004
Posts: 2,783
A
Allen Bass Fisher Offline OP
Extreme Angler
OP Offline
Extreme Angler
A
Joined: Aug 2004
Posts: 2,783
No ones had this problem?

Re: 1996 Skeeter Seat Bushings [Re: Allen Bass Fisher] #13243236 08/10/19 07:43 PM
Joined: Nov 2007
Posts: 4,229
ssmith Offline
TFF Team Angler
Offline
TFF Team Angler
Joined: Nov 2007
Posts: 4,229
if it is the brass one take a chisel an cut the top off use the new one to drive it down the hole

Re: 1996 Skeeter Seat Bushings [Re: Allen Bass Fisher] #13243884 08/11/19 03:54 PM
Joined: Aug 2004
Posts: 2,783
A
Allen Bass Fisher Offline OP
Extreme Angler
OP Offline
Extreme Angler
A
Joined: Aug 2004
Posts: 2,783
It is brass. Do you know where to get a new one?

Re: 1996 Skeeter Seat Bushings [Re: Allen Bass Fisher] #13244128 08/11/19 10:03 PM
Joined: Apr 2006
Posts: 964
D
dobbin Offline
Pro Angler
Offline
Pro Angler
D
Joined: Apr 2006
Posts: 964
Raise the front compartment door. pull the plastic box out by removing several screws which hold it in place. Underneath the deck you will find a bracket that is held in place by 2 1/2 headed bolts remove them and replace the brass bushing. May be hard to find but one can be made out of brass stock.


Champion Jigs
Re: 1996 Skeeter Seat Bushings [Re: Allen Bass Fisher] #13244422 08/12/19 03:46 AM
Joined: Nov 2007
Posts: 4,229
ssmith Offline
TFF Team Angler
Offline
TFF Team Angler
Joined: Nov 2007
Posts: 4,229
swivel ease part no 587987 is the brass insert much easier to take a chisel cut the flange off the top an drive the new one in with a dead blow hammer. if you cant find one i have them pm me

Previous Thread
Index
Next Thread


© 1998-2019 OUTDOOR SITES NETWORK all rights reserved USA and Worldwide
Powered by UBB.threads™ PHP Forum Software 7.7.3