Forums59
Topics1,038,882
Posts13,954,768
Members144,181
|
Most Online39,925 Dec 30th, 2023
|
|
Another Ultrex problem?
#13178971
06/07/19 07:36 PM
|
Joined: Nov 2008
Posts: 7,616
361V
OP
TFF Celebrity
|
OP
TFF Celebrity
Joined: Nov 2008
Posts: 7,616 |
So I had this same “quirk” or “issue” on my Fortrex I had forever. My Ultrex will not “unlock” from the run or deployed position unless I step or put weight on the trolling motor bracket. Just yanking the cable will not allow you to stow/raise the motor back up into the stowed position. The locking mechanism does not unlock when you yank the cord. I dealt with this same thing the whole time I had the Fortrex and kinda just got used to it.....but don’t like it. Anyone else?
Last edited by 361V; 06/07/19 09:19 PM.
|
|
Re: Another Ultrex problem?
[Re: 361V]
#13178991
06/07/19 07:57 PM
|
Joined: Jun 2012
Posts: 20,698
Douglas J
TFF Guru
|
TFF Guru
Joined: Jun 2012
Posts: 20,698 |
Mine does the same occasionally.
#MFGA
|
|
Re: Another Ultrex problem?
[Re: 361V]
#13178994
06/07/19 08:05 PM
|
Joined: May 2014
Posts: 7,737
GIG'EM AGGIES
TFF Celebrity
|
TFF Celebrity
Joined: May 2014
Posts: 7,737 |
I see the Pro's step on the head and pull on the cord simultaneously so I guess some are tighter than others, mine releases just fine. Don't know of an adjustment either but there has to be some way to fix that.
I am a Senager. (Senior teenager) I have everything that I wanted as a teenager, only 50 years later. I get an allowance every month. I have PU truck and a bass boat, I am blessed. Conscience never acquits, it either accuses or excuses.
|
|
Re: Another Ultrex problem?
[Re: 361V]
#13178997
06/07/19 08:08 PM
|
Joined: Nov 2010
Posts: 5,099
Wayne P.
TFF Celebrity
|
TFF Celebrity
Joined: Nov 2010
Posts: 5,099 |
Twisted mount or support bar the wrong length.
If the support bar is the correct length, loosen the mount bolts so it works OK and shim the one that is causing the twist.
Helix 12 CHIRP MEGA SI+ GPS G3N and G4N, 1198c SI, SOLIX 10 SI G3, Helix 8 MEGA SI+ GPS G4N, SOLIX 12 SI and G3, MEGA 360, MEGA LIVE TL, RC-1
|
|
Re: Another Ultrex problem?
[Re: 361V]
#13179009
06/07/19 08:25 PM
|
Joined: Aug 2009
Posts: 1,086
TwoLakes
Extreme Angler
|
Extreme Angler
Joined: Aug 2009
Posts: 1,086 |
Have you tried greasing the two little plastic pieces that lock into place? Might help.
|
|
Re: Another Ultrex problem?
[Re: 361V]
#13179028
06/07/19 09:13 PM
|
Joined: Dec 2011
Posts: 1,617
NickHasty
Extreme Angler
|
Extreme Angler
Joined: Dec 2011
Posts: 1,617 |
It’s too bad they built the ultrex on the fortrex mount, they are junk. Those bushing are constantly a problem. Good luck.
|
|
Re: Another Ultrex problem?
[Re: 361V]
#13179066
06/07/19 10:19 PM
|
Joined: Jul 2003
Posts: 3,358
McLovin’
TFF Team Angler
|
TFF Team Angler
Joined: Jul 2003
Posts: 3,358 |
You might try making sure the support bar is short enough to allow it to come down enough to lock Mine was doing same thing after 3 days rough water on Rayburn and that's all it was, the black nut on the bar came loose and it adjusted the height of the head of the TM in the stowed position.
The guys you see stepping on them to unlock are usually the Motorguides, that's how I used to have to mine
|
|
Re: Another Ultrex problem?
[Re: 361V]
#13179258
06/08/19 02:26 AM
|
Joined: Jul 2008
Posts: 146
AMISTAD BASS
Outdoorsman
|
Outdoorsman
Joined: Jul 2008
Posts: 146 |
The bolts in the mount take a beating and will need tightened. It happens on all brands. If the mount is not level it gets tweaked and then is hard to lift etc.. You’ll need to get a wrench inside the hull to hold the nut. A screwdriver from the top won’t be enough.
|
|
Re: Another Ultrex problem?
[Re: 361V]
#13179396
06/08/19 12:13 PM
|
Joined: Aug 2005
Posts: 6,791
slim 285
TFF Celebrity
|
TFF Celebrity
Joined: Aug 2005
Posts: 6,791 |
My Fortrex needs lubricating about twice a year . I just use garage door lubricant. It sets close to the boat in the garage .
|
|
Re: Another Ultrex problem?
[Re: 361V]
#13179448
06/08/19 02:05 PM
|
Joined: Mar 2008
Posts: 1,635
James P.
Extreme Angler
|
Extreme Angler
Joined: Mar 2008
Posts: 1,635 |
Had same issue took it to shop twice, the third time got a new mount. problem solved.
|
|
Re: Another Ultrex problem?
[Re: 361V]
#13179577
06/08/19 06:03 PM
|
Joined: Dec 2010
Posts: 408
reelfast
Angler
|
Angler
Joined: Dec 2010
Posts: 408 |
I’ve already had the lock mechanism replaced under warranty on mine. It broke on the third time on the first outing !! Needless to say I was not happy. Just put the damn thing on and have to turn around and take it off.
|
|
Re: Another Ultrex problem?
[Re: slim 285]
#13179590
06/08/19 06:23 PM
|
Joined: Jun 2012
Posts: 635
El Skeeter
Pro Angler
|
Pro Angler
Joined: Jun 2012
Posts: 635 |
My Fortrex needs lubricating about twice a year . I just use garage door lubricant. It sets close to the boat in the garage .
I apply the same on all moving parts.
|
|
Moderated by banker-always fishing, chickenman, Derek ðŸ, Duck_Hunter, Fish Killer, J-2, Jacob, Jons3825, JustWingem, Nocona Brian, Toon-Troller, Uncle Zeek, Weekender1
|