Hey guys i thought id share with you how we made our fluid beds for painting jigheads. I looked on youtube and watched lots and lots of videos and took ideas from different videos and used some of my own. All the materials i got at walmart in the pet section by the aquariums. Total cost was under 25 dollars for air pump, tubing, and regulators. I made mine with 4 beds 1 for paint 1 for another color to sprinkle on jig if you want a two-tone jig 1 for glitter dip and 1 for uv blast.
The cups are made from 2inch pvc and consist of 1 coupler 1 cap and 1 2inch piece of pvc there is also 4 inner slip caps that i use as the base . you could make just 1 cup and change paint but i thought thas was messy and i have too many colors for that besides i store the paint in the cups and change colors by slipping the cups on and off.The filter for the cups is 1 sheet of copy paper. I tried different things but copy paper worked the best.

That's a good looking fluid bed you have there!

Skip

Thank you skip!

HELL OF A JOB

Thank you Bently!

Oohhh yeah, those'll work.....

Thank you SK.!

Nicely done!

Thanks chuck!

I got to make me some here soon

Bring the family over for supper soon and you can see exactly how to build one

We may have to take you up on that once things slow up around the ranch

Busy, i hear ya! Im hauling utv's to ft davis and alpine ranches all week .... Ask the missus if she can bring that chocolate grape thing she makes when yall come over

Very nice setup guys, well done those pescado in your area ain't gotta chance....

Thanks jig man! I'm just the builder of the fluid bed. Pot licker deserves all the credit she's the one that paints all them purdy jigheads