Anyone ever have a power pole loose in the up position. The mount is not loose but going down the road one shakes more than the other. One is stiff and doesn�t move when you push it but the other definitely loose to the touch. Any ideas how to tighten it up?

Need to tighten up the bolts at the bushings. Don�t over tighten or it won�t go down
I had One wear out the bushings and power pole sent me
Two sets for free

I bought mine last year, and have had to tighten bolts up and down both poles twice due to regular use and getting hauled down the highway 4 or 5 times a week. Just check each bolt, and shake the poles with them partialy extended, you should be able to tell which ones need tightening.

when traveling down the road I wrap my power pole with a bungee strap. this keeps shaking down.
wild bill

I was gaining to ask if any stowed them while trailering. I guess a small bungy would be cheaper than I power pole sleeve they make.

The sleeve will help with bushing wear and tear.

Just use a small bungy. I have Blades, and a small bungy is more than strong enough to keep them from deploying. Even if you intentionally try to force them down, the bungy will hold.

It doesn�t look �cool� though. So spend as much money as needed to satisfy the cool factor.

Probly just find some Velcro straps to use. By the way. Deployed them, checked them all, seemed okay. When I raised them back up slack was out. I guess that was my problem