Forums59
Topics1,037,806
Posts13,934,776
Members144,150
|
Most Online39,925 Dec 30th, 2023
|
|
200+hp swivel bracket?
#12961304
11/10/18 06:02 PM
|
Joined: Jul 2008
Posts: 7,643
bradnitro175
OP
TFF Celebrity
|
OP
TFF Celebrity
Joined: Jul 2008
Posts: 7,643 |
I need to repair mine are there some stronger metal race bushing kits for this?also might be interested in a used complete bracket,pin and yoke if anybody got one. 2003 200 efi 3.0 OT775042
BIG FAT BASS LIVES MATTER
|
|
Re: 200+hp swivel bracket?
[Re: bradnitro175]
#12961817
11/11/18 12:23 PM
|
Joined: Nov 2006
Posts: 2,846
TLW
Extreme Angler
|
Extreme Angler
Joined: Nov 2006
Posts: 2,846 |
only option really is stainless arm and yoke...
justa little parts info.. all 2.5 and 3.0 swivel bracket, bushings, O-rings/seal etc. (with NO OEM upgrades listed) and arms are same and will interchange with exception of bottom yoke (3.0 different)..
|
|
Re: 200+hp swivel bracket?
[Re: bradnitro175]
#12961877
11/11/18 02:16 PM
|
Joined: Dec 2009
Posts: 1,477
RANGER SKI
Extreme Angler
|
Extreme Angler
Joined: Dec 2009
Posts: 1,477 |
Call Ronnie fretwell 817 366 3403. He more than likely has some. He races Mercks and he is the guru
|
|
Re: 200+hp swivel bracket?
[Re: TLW]
#12961994
11/11/18 04:33 PM
|
Joined: Jul 2008
Posts: 7,643
bradnitro175
OP
TFF Celebrity
|
OP
TFF Celebrity
Joined: Jul 2008
Posts: 7,643 |
Thats good to know I found a 25" one with the trim still attached,think it'll fit
BIG FAT BASS LIVES MATTER
|
|
Re: 200+hp swivel bracket?
[Re: bradnitro175]
#12962031
11/11/18 05:26 PM
|
Joined: Nov 2006
Posts: 2,846
TLW
Extreme Angler
|
Extreme Angler
Joined: Nov 2006
Posts: 2,846 |
should.. tha added length should be with tha downhousin'.. not tha clamp and trim..
|
|
Re: 200+hp swivel bracket?
[Re: bradnitro175]
#12962035
11/11/18 05:31 PM
|
Joined: Jul 2008
Posts: 7,643
bradnitro175
OP
TFF Celebrity
|
OP
TFF Celebrity
Joined: Jul 2008
Posts: 7,643 |
That's what I hoped.never done this before but seems easy enough
BIG FAT BASS LIVES MATTER
|
|
Re: 200+hp swivel bracket?
[Re: bradnitro175]
#12962056
11/11/18 06:00 PM
|
Joined: Nov 2006
Posts: 2,846
TLW
Extreme Angler
|
Extreme Angler
Joined: Nov 2006
Posts: 2,846 |
take your time.. clean parts then clean again.. a few pictures before, during, and after.. will help.. did I mention "clean"???
Last edited by TLW; 11/11/18 06:01 PM.
|
|
Re: 200+hp swivel bracket?
[Re: bradnitro175]
#12987275
12/06/18 10:26 PM
|
Joined: Jul 2008
Posts: 7,643
bradnitro175
OP
TFF Celebrity
|
OP
TFF Celebrity
Joined: Jul 2008
Posts: 7,643 |
You wasn't playing about the cleaning,The bushing job was easy,I think I put in a few hours cleaning the powerhead gasket tho.cleaned out my tuner and put in solid mounts whIle I had it apart
BIG FAT BASS LIVES MATTER
|
|
Re: 200+hp swivel bracket?
[Re: bradnitro175]
#12995158
12/14/18 03:11 PM
|
Joined: Nov 2002
Posts: 4,439
Gamblinman
TFF Team Angler
|
TFF Team Angler
Joined: Nov 2002
Posts: 4,439 |
Just interested....how carboned up were the relief port holes in the tuner?
Last edited by Gamblinman; 12/14/18 03:16 PM.
|
|
Re: 200+hp swivel bracket?
[Re: bradnitro175]
#12995806
12/15/18 02:29 AM
|
Joined: Jul 2008
Posts: 7,643
bradnitro175
OP
TFF Celebrity
|
OP
TFF Celebrity
Joined: Jul 2008
Posts: 7,643 |
Not too bad,There was a handful that was about 1/4 clogged on the bottom.motor has around 500 hrs
BIG FAT BASS LIVES MATTER
|
|
Re: 200+hp swivel bracket?
[Re: bradnitro175]
#12997439
12/17/18 02:19 PM
|
Joined: Jul 2010
Posts: 1,336
boatman025
Extreme Angler
|
Extreme Angler
Joined: Jul 2010
Posts: 1,336 |
We just replaced a set of bushing on a Pro XS 250. You can put solid mounts and if have Hydro steering you might need to get it up dated to new bushing also
Hughes Marine 3855 Osage Lane Wylie ,Texas
|
|
Moderated by banker-always fishing, chickenman, Derek 🐝, Duck_Hunter, Fish Killer, J-2, Jacob, Jons3825, JustWingem, Nocona Brian, Toon-Troller, Uncle Zeek, Weekender1
|