I have a 2018 Skeeter zx200. I am having problems loading onto the trailer. It always loads low to the left....I feel like the bunks aren't in correct position. Has anyone heard of this issue? I have never had this problem with any other trailer (including Skeeter) before.

Thanks!

you may be going in too deep with it try backing it in far enough to wet the boards an pull it out some until you find the sweet spot on the new trailers the bottom 2 boards are wider at the front to be an easier guide an as the boat goes up the boards narrow to make it fit the angle of the boat ramps have a lot to do with it also hope this helps.

There was a thread on BBC about the new Skeeter trailers being made from a misaligned jig. Some have had enough issues loading, that Skeeter appearantly had to warranty/replace a few trailers.