What HDS graphs do you currently have? If the bows HDS is a touch unit, then you can get an HDI 83/200/455/800kHz (000-10976-001, skimmer with temp. probe) transducer which will give you traditional 2D sonar and downscan. If all you want off of the transom is traditional 2D sonar, then you can get either an HST-WSBL 83/200kHz (000-0106-72 skimmer with temp probe) and mount it to the transom or a PD-WBL 83/200kHz (000-0106-73 puck, no temp probe) / PDRT-WBL 83/200kHz (000-0106-89 puck, remote temp probe) and mount it in the bilge. If the units are non-touch units, then you will need either the StructureScan module or a SonarHub and an LSS/HDI transducer for down/sidescan capabilities.
Last edited by MAK747; 10/30/18 04:40 PM.