Forums59
Topics1,039,208
Posts13,961,007
Members144,196
|
Most Online39,925 Dec 30th, 2023
|
|
2013 250 PRO XS TRIM DOWN ISSUE
#12848375
07/31/18 05:51 PM
|
Joined: Nov 2011
Posts: 102
BBR Bass Boat Rentals
OP
Outdoorsman
|
OP
Outdoorsman
Joined: Nov 2011
Posts: 102 |
I cannot trim DOWN from the switch at the steering column, but I can trim DOWN from the switch on the side of the motor. Trim UP works from both switches. 2 weeks ago it broke then it was fine for a week, now broke again. Is it a relay in the trim motor? If so anyone know the procedure to replace them? Anyone know the part number for the correct relay? Do I need to bleed the fluid and support the motor in the up position to change these relays? Any advice appreciated. Thanks
Last edited by BASSA; 07/31/18 06:04 PM.
|
|
Re: 2013 250 PRO XS TRIM DOWN ISSUE
[Re: BBR Bass Boat Rentals]
#12848407
07/31/18 06:13 PM
|
Joined: Mar 2006
Posts: 1,020
javelin150
Extreme Angler
|
Extreme Angler
Joined: Mar 2006
Posts: 1,020 |
Sounds like you just have a bad trim switch at the steering column.
If you had a bad relay, the switch on the motor wouldnt work either
|
|
Re: 2013 250 PRO XS TRIM DOWN ISSUE
[Re: javelin150]
#12848456
07/31/18 06:55 PM
|
Joined: Nov 2011
Posts: 102
BBR Bass Boat Rentals
OP
Outdoorsman
|
OP
Outdoorsman
Joined: Nov 2011
Posts: 102 |
Yes you are correct its the switch. Thanks
|
|
Re: 2013 250 PRO XS TRIM DOWN ISSUE
[Re: BBR Bass Boat Rentals]
#12866475
08/16/18 07:00 PM
|
Joined: Nov 2011
Posts: 102
BBR Bass Boat Rentals
OP
Outdoorsman
|
OP
Outdoorsman
Joined: Nov 2011
Posts: 102 |
Just an update it was not the switch it was one of the wires got trapped and pinched over time before it broke in 2, hence the intermittent power before it completely broke apart.
|
|
Moderated by banker-always fishing, chickenman, Derek 🐝, Duck_Hunter, Fish Killer, J-2, Jacob, Jons3825, JustWingem, Nocona Brian, Toon-Troller, Uncle Zeek, Weekender1
|