Forums59
Topics1,037,853
Posts13,935,636
Members144,150
|
Most Online39,925 Dec 30th, 2023
|
|
Transom savers
#12783625
06/07/18 02:11 PM
|
Joined: Feb 2005
Posts: 3,555
fivebites
OP
TFF Team Angler
|
OP
TFF Team Angler
Joined: Feb 2005
Posts: 3,555 |
Condundrum: I have always used a basic "transom saver". From back roller of trailer to motor type brackets. It seems to me those support the motor and mainly the transom better. Just bought a 2014 Legend Alpha 191 with a 200 ProXS with hydraulic steering. First time for me with hydraulic. Previous owner had one single white Yamaha sleeve style bracket (8" long and 2" diameter) that slides over the tilt/trim shaft, and two brackets that snap onto your hydraulic arms to prevent the motor from swinging side to side. I didn't like the single sleeve so when I took my boat to a local shop to get some minor work done I asked the mechanic. He said the snap on brackets were very bad for the motor and did not like the single sleeve. He recommended the motor mate. I bought one, took off the little snap on brackets and it seems very stable, but to me still doesn't prevent pressure/tension on the transom itself. Called Pete at Legend and he recommended the old style I used to use. Anyone had issues with the motor mate and transom/motor problems?
2019 Chevy Tahoe 2018 Basscat Eyra 250 Proxs PB Wife of 32 years! PB Largemouth 9.56 Ray Roberts
|
|
Re: Transom savers
[Re: Frank the Tank]
#12783664
06/07/18 02:30 PM
|
Joined: Mar 2009
Posts: 2,516
lipjerk
Extreme Angler
|
Extreme Angler
Joined: Mar 2009
Posts: 2,516 |
Beat me to it, I use a Motormate, and I'm happy with it, that's all I got
|
|
Re: Transom savers
[Re: fivebites]
#12783691
06/07/18 02:49 PM
|
Joined: Jul 2007
Posts: 825
C_Fisher
Pro Angler
|
Pro Angler
Joined: Jul 2007
Posts: 825 |
No problems for me and I used motormate when they first came out and now use a prorule. I dont think your motor will bounce around any more on the road that it does in rough water.
|
|
Re: Transom savers
[Re: fivebites]
#12783709
06/07/18 03:01 PM
|
Joined: Jan 2018
Posts: 4,942
Notaguide
TFF Team Angler
|
TFF Team Angler
Joined: Jan 2018
Posts: 4,942 |
Ive never used a transom saver once in my life. My boat is 18 years old
|
|
Re: Transom savers
[Re: fivebites]
#12783713
06/07/18 03:03 PM
|
Joined: Jan 2004
Posts: 72,297
Mark Perry
Super Freak
|
Super Freak
Joined: Jan 2004
Posts: 72,297 |
Transom savers are horribly misnamed.
|
|
Re: Transom savers
[Re: fivebites]
#12783721
06/07/18 03:08 PM
|
Joined: Oct 2007
Posts: 3,679
PEDRO H.
TFF Team Angler
|
TFF Team Angler
Joined: Oct 2007
Posts: 3,679 |
I use the pro rule transom saver that came with the boat. whats the difference between the beating your transom takes in rough water or other boat wake while underway compared to it sitting on the trailer going down the highway.
Last edited by SKEETER_MAN_225; 06/07/18 03:17 PM.
|
|
Re: Transom savers
[Re: Mark Perry]
#12783737
06/07/18 03:19 PM
|
Joined: Feb 2005
Posts: 3,555
fivebites
OP
TFF Team Angler
|
OP
TFF Team Angler
Joined: Feb 2005
Posts: 3,555 |
Transom savers are horribly misnamed. Why Mark? I would think for those of you who say it takes the same beating on the lake as on the highway I humbly disagree. I'm not engineer, so take these with a huge grain of salt. I don't run my boat with the motor on the lake at the same angle it has when lifted when towing. Also, possibly the water helps buoy the motor to a very small degree. Just looking for a definitive answer (if there is one) since I got two very different answers...one from boat manufacturer, one from a guy who repairs boat manufacturers stuff. Do boat manufacturers require one for warranty?
2019 Chevy Tahoe 2018 Basscat Eyra 250 Proxs PB Wife of 32 years! PB Largemouth 9.56 Ray Roberts
|
|
Re: Transom savers
[Re: fivebites]
#12783740
06/07/18 03:22 PM
|
Joined: Mar 2010
Posts: 1,320
Stompy
Extreme Angler
|
Extreme Angler
Joined: Mar 2010
Posts: 1,320 |
Been using the old style for 30 years, never a problem.
Last edited by Stompy; 06/07/18 03:23 PM.
|
|
Re: Transom savers
[Re: fivebites]
#12783747
06/07/18 03:25 PM
|
Joined: Jan 2004
Posts: 72,297
Mark Perry
Super Freak
|
Super Freak
Joined: Jan 2004
Posts: 72,297 |
Transom savers are horribly misnamed. Why Mark? I would think for those of you who say it takes the same beating on the lake as on the highway I humbly disagree. I'm not engineer, so take these with a huge grain of salt. I don't run my boat with the motor on the lake at the same angle it has when lifted when towing. Also, possibly the water helps buoy the motor to a very small degree. Just looking for a definitive answer (if there is one) since I got two very different answers...one from boat manufacturer, one from a guy who repairs boat manufacturers stuff. Do boat manufacturers require one for warranty? My own opinion is that small little piece of aluminum tubing on old style transom saversis not holding up the weight of the motor off the transom. In addition when you place it on the trailer and attach it to your lower unit you are now transferring all the bumps and such from the road up to your motor. You can trim your motor up a bit and pretty well place all your weight on it and its not going down. I'm not convinced they take any weight off of the transom whatsoever nor do they keep the motor from bouncing up.
|
|
Re: Transom savers
[Re: PEDRO H.]
#12783752
06/07/18 03:28 PM
|
Joined: Jun 2008
Posts: 943
Stickchunker
Pro Angler
|
Pro Angler
Joined: Jun 2008
Posts: 943 |
whats the difference between the beating your transom takes in rough water or other boat wake while underway compared to it sitting on the trailer going down the highway.
I would think that the leverage the engine imposes on the transom while going down the HWY is completely different than compared to Take Off or Rough water, your engine is resting at roughly a 45* angle from the transom while going down the HWY, with the lower unit being approx. 2 - 2.5' away from the transom, where as your engine is pretty much vertical with the transom, and the lower unit is directly below, imposing completely different forces. Hell I don't know! LOL!
|
|
Re: Transom savers
[Re: fivebites]
#12783760
06/07/18 03:30 PM
|
Joined: Apr 2008
Posts: 671
Jake Blood
Pro Angler
|
Pro Angler
Joined: Apr 2008
Posts: 671 |
I always see transom savers on the highways leading to and from lakes.. I have seen 3 this year alone... funny.
|
|
Re: Transom savers
[Re: fivebites]
#12783790
06/07/18 03:54 PM
|
Joined: Nov 2008
Posts: 2,981
Chris G
Extreme Angler
|
Extreme Angler
Joined: Nov 2008
Posts: 2,981 |
Never knew this was such a hotly debated topic on here. I use the Motormate just because it made me feel good having something brace the motor. No idea if it does a damn thing but I use it every time I put my boat on the trailer. Maybe transom savers are the Hydrowave of the back of the boat.
|
|
Re: Transom savers
[Re: Stickchunker]
#12783907
06/07/18 05:33 PM
|
Joined: Oct 2007
Posts: 3,679
PEDRO H.
TFF Team Angler
|
TFF Team Angler
Joined: Oct 2007
Posts: 3,679 |
whats the difference between the beating your transom takes in rough water or other boat wake while underway compared to it sitting on the trailer going down the highway.
I would think that the leverage the engine imposes on the transom while going down the HWY is completely different than compared to Take Off or Rough water, your engine is resting at roughly a 45* angle from the transom while going down the HWY, with the lower unit being approx. 2 - 2.5' away from the transom, where as your engine is pretty much vertical with the transom, and the lower unit is directly below, imposing completely different forces. Hell I don't know! LOL! exactly I don't know either lol and don't lose sleep over it but i'm surprised there has not been a study done on it.
|
|
Re: Transom savers
[Re: fivebites]
#12783938
06/07/18 05:55 PM
|
Joined: Feb 2005
Posts: 3,555
fivebites
OP
TFF Team Angler
|
OP
TFF Team Angler
Joined: Feb 2005
Posts: 3,555 |
Surely there has been some kind of study on it. More than likely the people who designed and marketing them! Ok, you smart guys and engineers (def not me!), what's the story? Boat dealers/manufacturers? Let's hear it. Pete at Legend says use the old school. For you guys that are buying brand new boats, any suggestions/demands from the dealers re warranty ect?
2019 Chevy Tahoe 2018 Basscat Eyra 250 Proxs PB Wife of 32 years! PB Largemouth 9.56 Ray Roberts
|
|
Moderated by banker-always fishing, chickenman, Derek 🐝, Duck_Hunter, Fish Killer, J-2, Jacob, Jons3825, JustWingem, Nocona Brian, Toon-Troller, Uncle Zeek, Weekender1
|