You guys find any particular tungsten weights that just tend to get hung up LESS in rocks? I know you’ll lose them eventually but you know what I’m getting at. TIA.

I only use lead for c-rigs, but a cylinder or egg weight does better in rocks IMO

Lead is better for C rigging. Softer metal will pull through problem areas better than tungsten.

PM sent, i-Fish.

I use 1/2 ounce bullet weights about $1 a pack.

If you want tungsten barrel weights, this place has them. I’ve ordered before and they will take about 10days to arrive. But they are priced right


http://www.omfishingsinkers.com/Tungsten...ys_p-80497.html

I like to break off C-rigs to much. I'll stick to brass.

I’d run 1 oz tungsten barrel weight in rocks, no beads or brass clacker pieces. Use 50 ibs braid for your mainline, sure you’ll use a few, but not many...

1/2 ounce lead bullet or egg. Some of the more experienced anglers will use a 1 ounce but 1/2 ounce works fine for me.

I like 3/4 lead, for the workout.

3/4oz Tungsten 75% of the time and 1oz the othe 25% for 30ft+ Plastic or tungsten beads

I still use lead OR brass and glass on my C-rigs. Use just enough weight to get it down and feel it. From 3/8s to 1.5 oz. depending on the wind and the cover I am fishing. Generally, I like 1/2 to 3/4 for most stuff, but when teh wind lets down or starts howling, the smaller and bigger girls come out on the weights scale. Hope this helps. Tight lines, keep safe and good luck.

Thad Rains

I use 1oz lead 99% of the time.

I’m exclusively asking about shapes of weights. I’ve only used bullet style. I don’t lose them all the time but maybe other shapes are less prone to wedging in rocks.

http://www.tacklewarehouse.com/Vike_Tungsten_Carolina_Weight/descpage-VIKECAR.html

Case closed!