Forums59
Topics1,037,875
Posts13,935,890
Members144,150
|
Most Online39,925 Dec 30th, 2023
|
|
LSS-1Transducer+ HDS Touch units = ????
#12459110
10/09/17 03:38 PM
|
Joined: Dec 2008
Posts: 6,980
Fishbonz
OP
TFF Celebrity
|
OP
TFF Celebrity
Joined: Dec 2008
Posts: 6,980 |
I recently replaced the original LSS-2 transducer that came with my HDS Gen 2 touch Units( 12 & 7 ) with an LSS-1 Transducer.I also added the adapter cable to make the project compatible.I made the switch because I wanted to reposition the transducer to a better place in back of the boat and the LSS-2 ducer was too long to fit in the space I selected.So after I made the switch and went out on the lake to run both units,the 12 @ the console & the 7 up front,Every screen worked perfect on the console unit but when I ran the front bow unit I noticed the sidescan feature did not work and the down image went from dark to unseeable #!? Does anyone have an Idea on what & why this is? The only change made was the transducer the connection between the two units is still the same.
Last edited by Fishbonz; 10/09/17 03:40 PM.
HE aka Fishbonz
|
|
Re: LSS-1Transducer+ HDS Touch units = ????
[Re: Fishbonz]
#12460410
10/10/17 01:54 PM
|
Joined: Mar 2010
Posts: 25,663
T Bird
TFF Guru
|
TFF Guru
Joined: Mar 2010
Posts: 25,663 |
Make sure you have the LSS1 transducer selected on the front unit.
Okie by birth, Texan by choice. USAF "Thunderbirds" Alumni 1985-1989
|
|
Re: LSS-1Transducer+ HDS Touch units = ????
[Re: T Bird]
#12461035
10/10/17 09:27 PM
|
Joined: Dec 2008
Posts: 6,980
Fishbonz
OP
TFF Celebrity
|
OP
TFF Celebrity
Joined: Dec 2008
Posts: 6,980 |
Make sure you have the LSS1 transducer selected on the front unit. The front Unit is linked to the Console unit.They both use one Transducer. I can use them together or independantly or at least I could before I switched to the LSS-1.
HE aka Fishbonz
|
|
Re: LSS-1Transducer+ HDS Touch units = ????
[Re: Fishbonz]
#12461605
10/11/17 11:49 AM
|
Joined: Mar 2010
Posts: 25,663
T Bird
TFF Guru
|
TFF Guru
Joined: Mar 2010
Posts: 25,663 |
Understand, but you still need to select the correct transducer type on both head units.
Okie by birth, Texan by choice. USAF "Thunderbirds" Alumni 1985-1989
|
|
Re: LSS-1Transducer+ HDS Touch units = ????
[Re: T Bird]
#12461841
10/11/17 03:18 PM
|
Joined: Dec 2008
Posts: 6,980
Fishbonz
OP
TFF Celebrity
|
OP
TFF Celebrity
Joined: Dec 2008
Posts: 6,980 |
Understand, but you still need to select the correct transducer type on both head units. The correct Transducer has been selected for both captn.This was done even before I switched to the LSS-1.
Last edited by Fishbonz; 10/11/17 03:21 PM.
HE aka Fishbonz
|
|
Re: LSS-1Transducer+ HDS Touch units = ????
[Re: Fishbonz]
#12462263
10/11/17 10:33 PM
|
Joined: Dec 2008
Posts: 16,029
grout-scout
TFF Guru
|
TFF Guru
Joined: Dec 2008
Posts: 16,029 |
Just so I understand. You can see the image fine at the console but it is too dark to see at the bow?
And you adjusted the contrast? Turned on and off auto contrast?
If you did those, then change the Ethernet cable on the port plugs. If that still doesnt work, try a soft or hard reset.
|
|
Re: LSS-1Transducer+ HDS Touch units = ????
[Re: grout-scout]
#12462372
10/12/17 12:20 AM
|
Joined: Dec 2008
Posts: 6,980
Fishbonz
OP
TFF Celebrity
|
OP
TFF Celebrity
Joined: Dec 2008
Posts: 6,980 |
Just so I understand. You can see the image fine at the console but it is too dark to see at the bow?
And you adjusted the contrast? Turned on and off auto contrast?
If you did those, then change the Ethernet cable on the port plugs. If that still doesnt work, try a soft or hard reset. I`ve never even thought about the CONTRAST DUH.....Thanks I`ll give it a try!
Last edited by Fishbonz; 10/12/17 12:22 AM.
HE aka Fishbonz
|
|
Moderated by banker-always fishing, chickenman, Derek 🐝, Duck_Hunter, Fish Killer, J-2, Jacob, Jons3825, JustWingem, Nocona Brian, Toon-Troller, Uncle Zeek, Weekender1
|