texasfishingforum.com logo
Main Menu
Advertisement
Affiliates
Advertisement
Newest Members
TraeMartin, Power-Pole CS, T-Rigger, JoeGoes, EcKo
119150 Registered Users
Top Posters(All Time)
hopalong 120,565
TexDawg 119,511
Bigbob_FTW 94,879
John175☮ 85,892
Pilothawk 83,259
Bob Davis 81,478
Mark Perry 72,280
Derek 🐝 68,311
JDavis7873 67,416
Forum Statistics
Forums59
Topics1,037,815
Posts13,934,987
Members144,150
Most Online39,925
Dec 30th, 2023
Print Thread
SI Transducer Mounting #12279899 06/05/17 09:57 PM
Joined: Mar 2016
Posts: 888
C
canyoncreek06 Offline OP
Pro Angler
OP Offline
Pro Angler
C
Joined: Mar 2016
Posts: 888
Sorry for the long post. My boat is a Weldcraft flatbottom with a tunnel and float pods. My old Lowrance DI transducer was on the float pod on the right side and worked ok. I moved it up to the bow and put the transducer on the trolling motor. I'm afraid that if I put the Helux 7 transducer on the float pod the lower unit will probably interfere with it. Basically the skeg is the only part that sticks below the bottom of the hull with the jack plate raised all the way up. I'll be perfectly honest and admit I know nothing about SI. With that I'm not sure how the beam works and how much of the water column 5-6" of the skeg will block. The other option is to mount it between the tunnel and the float pod on a piece of starboard. Boat is primarily used for crappie fishing which is why I would like SI. Any help/opinions would be greatly appreciated



Columbus took a chance and he made it.
Re: SI Transducer Mounting [Re: canyoncreek06] #12279912 06/05/17 10:04 PM
Joined: Nov 2010
Posts: 5,090
W
Wayne P. Online Content
TFF Celebrity
Online Content
TFF Celebrity
W
Joined: Nov 2010
Posts: 5,090
SI has to "see" left and right. Humminbird's SI covers from the water's surface to past vertical under the transducer on both sides.

You can try it in that location, since you have a jackplate that may give you the clearance you need.
If you have too much blockage, you can use two SI transducers, one on each pod and connect them to the display with the AS SILR Y cable. That would use the left side SI on the left transducer and right side SI/2D/Temp on the right side SI transducer.


Helix 12 CHIRP MEGA SI+ GPS G3N and G4N, 1198c SI, SOLIX 10 SI G3,
Helix 8 MEGA SI+ GPS G4N, SOLIX 12 SI and G3, MEGA 360, MEGA LIVE TL, RC-1
Re: SI Transducer Mounting [Re: Wayne P.] #12280226 06/06/17 01:55 AM
Joined: Mar 2016
Posts: 888
C
canyoncreek06 Offline OP
Pro Angler
OP Offline
Pro Angler
C
Joined: Mar 2016
Posts: 888
Originally Posted By: Wayne P.
SI has to "see" left and right. Humminbird's SI covers from the water's surface to past vertical under the transducer on both sides.

You can try it in that location, since you have a jackplate that may give you the clearance you need.
If you have too much blockage, you can use two SI transducers, one on each pod and connect them to the display with the AS SILR Y cable. That would use the left side SI on the left transducer and right side SI/2D/Temp on the right side SI transducer.


Thank You, Sir. Right now it is mounted where the old one was on the right pod on a piece of starboard. This weekend I'm going to see what it does with some known objects and see if it can detect them on the left side. If not then I will probably just get another transducer and AS SILR Y cable.

>E


Columbus took a chance and he made it.
Re: SI Transducer Mounting [Re: canyoncreek06] #12283927 06/08/17 04:04 AM
Joined: Aug 2016
Posts: 1,159
ShinerInTx Online Content
Extreme Angler
Online Content
Extreme Angler
Joined: Aug 2016
Posts: 1,159
Post a pic looking from the side. Hard to tell with that pic. But essentially, you need clear water on both sides and below the si transducer.


[Linked Image][Linked Image]
Previous Thread
Index
Next Thread

© 1998-2022 OUTDOOR SITES NETWORK all rights reserved USA and Worldwide
Powered by UBB.threads™ PHP Forum Software 7.7.3