Texas Fishing Forum

Looking for some good Equiptment.

Posted By: **TheLoneRanger**

Looking for some good Equiptment. - 07/28/16 08:12 PM

I am going to start buying some things to start making my own plastics. What's you guys opinions on good molds, great molds, good and great injectors.... I am a bass fisherman and love zoom baits and would like to get some molds that are similar to what they sell... Looking for ribbon tail worm molds, craw molds, something like a brush hog to start with... What do y'all recommend or suggest... Thanks in advance....
Posted By: psalty

Re: Looking for some good Equiptment. - 07/28/16 11:54 PM

I recommend checking out the many hand-pour and injector flix on you-tube. popcorn2
Spoiler Alert- a lot of fun but addicting.
Personally I wished I'd observed the you-tubes prior to,
and also recommend microwave in lieu of hot plates. 2cents
Posted By: **TheLoneRanger**

Re: Looking for some good Equiptment. - 07/29/16 01:58 AM

Thanks. I have been watching. Just wondering which molds are better then others and what not. Which brands to stay away from and etc. I just don't want to fly into this buying junk molds and equiptment that I wont be happy with. Trying to get a little feedback from the guys that also use the baits..
Posted By: psalty

Re: Looking for some good Equiptment. - 07/29/16 02:32 AM

You can check out enforcer-bait-molds e-bay where I have picked up quite a few.
Zeiners(zlures),enforcer-bait-molds - injector
LinMar (linmar713), open pour and you will find periodically used silicone open pour.
Bearbaits, M-F Manufacturing,and Mudhole - off webs.
Also google up soft plastic molds and you will find a substantial number of suppliers.
As far as soft plastic by the quart/gallon I have purchased from LimMar Fishing and it is reasonably priced.
Good luck and hope to see your results
© 2024 Texas Fishing Forum