devcon 2ton

Where do yall buy yours at?

I checked everywhere local and couldn't find the 30 minute epoxy. I ended up ordering the 4.5 oz bottles off of Amazon and I'm waiting on them to show up.

that' probably the best place and the cheapest. btw your baits are ready any time you are.

omnimodels on ebay
http://www.ebay.com/itm/NEW-Devcon-30-Mi...=item4cfef6ade4

http://www.amazon.com/gp/aw/d/B00C3Z9W8G...ds=devcon+2+ton

I didn't know I was supposed to post a link. This is the one that I ordered.

http://www.amazon.com/2-ton--epoxy--two-...ds=devcon+2+ton

Could have swore I saw some at either Academy or the Grapevine Bass Pro the other day.

a lot of places carry devcon but it's the 5 minute kind. make sure it says 30 minute. with that you really only have about 12-15 minutes of real working time before the stuff starts to set up.
i put 2-3 drops of alcohol in a mixture for one or two baits and it helps keep the epoxy workable a little longer and it thins it just enough to make it brush on much easier.

It was the 30 minute. I was surprised to see it there. Denatured alcohol works quite well to thin it. Used to use it to protect custom painted salmon blades.

Check your local hobby store for this stuff, it might be labeled as the stores brand but will have the BSI logo on it somewhere.

I like this stuff better but its pretty runny and should be used with a drying wheel. I could get 10-15 baits coated at a time using it...