Texas Fishing Forum

Need help/suggestions to improve my small boat trailer

Posted By: richg

Need help/suggestions to improve my small boat trailer - 11/10/15 11:12 PM

I am having trouble hitting this 6-inch roller with my 1648 Lowe tinny. Is there a device made that will fit on my 3x3 trailer frame, that would hold a 12-inch roller? Or, any other suggestions appreciated. thanks richg

[img]https://lh3.googleusercontent.com/6d2vDnGBPGN2kKO01WvYajjmj59X80vGfW-pQOgsq5Q=w140-h105-p[/img]
Posted By: ChuChu1

Re: Need help/suggestions to improve my small boat trailer - 11/11/15 08:25 PM

Small pic, but it looks like your bunks are too short. My bunks guide me to the front roller.

As far as adding a 12" roller, a good boat dealer or trailer shop should be able to fix you up. Just measure the main frame channel width so they cam match it up. If they can't help, any decent welding shop can bend you some brackets to fit a 12" on your trailer.
Posted By: Jimfishes

Re: Need help/suggestions to improve my small boat trailer - 11/17/15 05:45 PM

Might get more response moving this topic to boats/motors instead of tow vehicles autos...

I would focus on getting bunk boards correct for boat bottom and not focus on rollers if possible.
© 2024 Texas Fishing Forum