Phoenix Flush Mount Electronics

Does anyone have a recommendation for a replacement plate or gimbal mount for flush mounting a sonar / GPS on the front deck of a Phoenix 619 Pro? I currently have a Humminbird 798c up front and I'm wanting to go to a larger screen and possibly replace the flimsy plate that came from the factory.

Precision sonar mounts will solve ur problem

They have the "Phoenix mounts", or you could get a Deck-It or a Precision, as posted above ^^

I made my own for the console, could do the same for the front but I only have an HDS7 up front so it fits flush mounted.

I took the grey plastic piece it comes with and had a piece of aluminum cut to match. Drilled all my holes and got it mocked up like I wanted then had it powder coated.

kellisag,
Are the black fasteners just caps on phillips head screws?

It came with screws there from the factory. I replaced the screws with stainless bolts with big fender washers on the back side. I just re-used the black caps to give it a cleaner look.

Thanks for the info!