Reliable and reasonable mechanic

Looking for someone to repair or replace a steering cable in a 95 skeeter 150zx with a 150 black max on the back


It's pulling hard to the right.

Tried adjusting the fin on the lower to no avail.


When you trim it out it gets better but it pulls even at idle...


Thoughts?


Needing a reasonable mechanic shop or individual in the tarrant co. Area... I am in Hurst... (Not a fan of fun n sun)


Thanks guys

I would make the drive to Rockwall Marine just east of Rokwall on FM 276

East of Rockwall, damn fat fingers

I'm using Vip-per boat co. in Arlington right now. 972-641-4884

Charlies in Alvarado.....

Call Chad 817 228 5848
South of Denton

I'd also look into converting it to hydraulic steering. There are some very reasonably priced kits available online. That's what we did on My dad's first boat years ago. When you get it done you'll wonder why you went so long without.

Bump ... Any other suggestions?

Started to go with hydraulic , changed directions replaced the current cables , drove my brothers boat , should have converted to hydraulics .

Patterson Marine in Haltom City 817-838-0501. Ronnie replaced the cables on a 1990 Ranger I use to own. He did good work at a reasonable price and timely manner.

give me a call Ive done 100's and I come to you.

Cal Burch (817) 300-2827 located in Azle and provides top notch service.

Angler'so Marine in Gun Barrel
He replaced my steering on my 2000 Skeeter and did a great job
In & out a day ahead of schedule

Patterson Marine in Haltom City or Charlies in Alvarado

Unfortunately, those two words don't go together in this subject

Yes they do !!!! Sorry Frank.
Angler's Marine --- Terry Tanner
Excellent Mechanic and will generally get the work completed before the agreed date.

Ha. Fast, cheap, and good. You can only pick 2.

What he said

Try Charlie's in Alvarado and either talk to Charlie or Keith and you will not be dis appointed. Best outboard shop I've found and cannot beat them.