Posted By: Hog Jaw
Up grading electronics from Hummingbird 1197 and 1198 - 07/26/18 07:01 PM
Advice for up grade , staying with Hummingbird , have 4K to work with for two units . Thanks .
Posted By: Taylored
Re: Up grading electronics from Hummingbird 1197 and 1198 - 07/26/18 08:23 PM
If you want side imaging at the bow I would suggest 2 helix 10 mega si units. That should leave you enough to network them, buy mounts and lakemaster/navionics chips. If no side imaging at bow I'd get a helix 10 mega di and put the rest in my wallet.
Posted By: nitroslim
Re: Up grading electronics from Hummingbird 1197 and 1198 - 07/26/18 09:01 PM
does the 4k include selling the 1197 and 98 or are you keeping them also. You can network them with the other units.
The graphs I had posted has been sold
Posted By: John175☮
Re: Up grading electronics from Hummingbird 1197 and 1198 - 07/27/18 10:49 AM
Might be over your budget but...
HUMMINBIRD HELIX 12 DI CHIRP for the front
HUMMINBIRD HELIX 12 SI CHIRP for the dash
HUMMINBIRD AS 360 TM - 360 for the trolling motor
HUMMINBIRD AS ETH 5pxg 5 Port Ethernet Switch
Posted By: Hog Jaw
Re: Up grading electronics from Hummingbird 1197 and 1198 - 07/27/18 03:38 PM
Thanks for the info guys , still trying to put together the most bang for the buck .
Posted By: NickHasty
Re: Up grading electronics from Hummingbird 1197 and 1198 - 07/27/18 07:03 PM
The most bang for your buck is to keep the good units you have...