Posted By: TxRanger1
Bolt size or thread - 06/15/18 08:13 PM
Lost the knobs that attach the lowrance fish finder to the gimble bracket. What size bolts are those on the knobs. I need to pick a couple up
Posted By: Huckleberry
Re: Bolt size or thread - 06/15/18 08:15 PM
sizes may vary between models
Posted By: GIG'EM AGGIES
Re: Bolt size or thread - 06/15/18 08:45 PM
More than likely 1/4 x 20 sae threads but you're probably going to need washers also. Recommend stainless too.
To bad your not closer to Ft Worth, I have a set id give you. However I got some along time ago at Lowes that looked almost identical to the original ones for a older unit i had.
Posted By: Bill Durham
Re: Bolt size or thread - 06/16/18 08:34 PM
It would not surprise me if they weren't metric. Be careful.
BD
Posted By: Donald Harper
Re: Bolt size or thread - 06/16/18 10:38 PM
ACE Hardware her in Justin has a drawer with several in it. They sell all kinds of knobs.