Changing pitch on a Laser II - Texas Fishing Forum

Posted By: Stump jumper

Changing pitch on a Laser II - 07/30/16 01:15 AM

I know you can increase up to 2". Can you take a 25 down to a 23? Have not seen Steve on here for a while. Is he still in Mineola?

Posted By: fordnut

Re: Changing pitch on a Laser II - 07/30/16 02:14 AM

He is actually in Quitman and replied a couple of posts down today to the guy trying to set his jack plate and trim. I would say best to call him or Josh. They worked wonders reworking my prop and setting up my Triton.

Posted By: txmasterpo

Re: Changing pitch on a Laser II - 07/30/16 05:07 AM

He pulled a 26 down to a "tight 25"....plus blue printed and cupped

Felt like got a new motor

Posted By: steve@S2Marine

Re: Changing pitch on a Laser II - 08/01/16 12:18 PM

sst props can be changed 1 degree. but, there are other things that can be done
to increase the rpms that you need.
Josh owns the prop shop now.
we are still in same building,etc.
his number is 903-763-0200

Posted By: Stump jumper

Re: Changing pitch on a Laser II - 08/01/16 05:16 PM

Originally Posted By: steve@scp

sst props can be changed 1 degree. but, there are other things that can be done
to increase the rpms that you need.
Josh owns the prop shop now.
we are still in same building,etc.
his number is 903-763-0200

thanks Steve. I will give Josh's number to the guy that owns the boat. So you are just doing jackplates now?

Posted By: steve@S2Marine

Re: Changing pitch on a Laser II - 08/01/16 05:36 PM

Originally Posted By: Stump jumper

Originally Posted By: steve@scp

sst props can be changed 1 degree. but, there are other things that can be done
to increase the rpms that you need.
Josh owns the prop shop now.
we are still in same building,etc.
his number is 903-763-0200

thanks Steve. I will give Josh's number to the guy that owns the boat. So you are just doing jackplates now?

yes sir.. just jack plates.. and will have my hydraulic plates out this week.