Texas Fishing Forum

Mercury 200 EFii

Posted By: LukeAnderson

Mercury 200 EFii - 06/12/16 02:36 PM

Have heard mixed things about these motors. What are some pros and cons. Going to look at a boat with one this week.
Posted By: Capt Jerry

Re: Mercury 200 EFii - 06/12/16 03:39 PM

The Mercury EFI motors have a very good reputation. They are thirsty, but strong performers. I would definitely take it to a Mercury specialist for a complete health check!
Posted By: HItec Redneck

Re: Mercury 200 EFii - 06/12/16 03:42 PM

I bought a used boat last fall that has a Mercury 150 EFI. The motor is 6 years old and had less than 100 hours on it. Check with some of the local Mercury mechanics at the local dealerships and find one that can bring their laptop and pull the codes and hours from the motor and do a compression check. I paid $50 to have this done and it was money well spent. My 150 runs great. It has a lot of power, starts easy and it is thirsty. It pushes my ProCraft 181 @ 58 mph (gps). Good luck.
Posted By: TLW

Re: Mercury 200 EFii - 06/12/16 04:55 PM

year?... 2.5 or 3.0?
Posted By: bronco71

Re: Mercury 200 EFii - 06/12/16 05:42 PM

Merc 200 EFI
Posted By: TLW

Re: Mercury 200 EFii - 06/12/16 06:09 PM

Originally Posted By: TLW
year?... 2.5 or 3.0?
Posted By: LukeAnderson

Re: Mercury 200 EFii - 06/12/16 06:31 PM

I believe it's a 3.0 '05 model. It's on a Bass cat
Posted By: TLW

Re: Mercury 200 EFii - 06/12/16 06:40 PM

kinda what i figured.. can't help much with that one but good thing is that "SOME" information can be pulled from those ecu's....
© 2024 Texas Fishing Forum