Posted By: BrianTx01
Can't get the oil filter off! - 01/24/16 05:50 AM
I went to change the oil in my Mercury 60 HP 4 stroke and I cannot get the filter off. Last year I bought a oil filter wrench (size F) that fits on a socket wrench. It worked just fine. This year I used the same darn wrench and it just slips on the filter. I tried to get adjustable belt type wrench and it impossible to get to because of the close quarters. Any suggestions?
Posted By: BrianTx01
Re: Can't get the oil filter off! - 01/24/16 06:40 AM
I solved my own problem. I put electrical tape around the filter and it provided enough friction for the socket filter wrench to grip.
Posted By: Freeman Clark
Re: Can't get the oil filter off! - 01/24/16 06:39 PM
Have had to drive a screw driver into a lot of filters to break them loose.
Posted By: Tommy Yetts
Re: Can't get the oil filter off! - 01/25/16 02:21 PM
Did you buy the correct oil filter last year?
Posted By: LOSTTEXAN
Re: Can't get the oil filter off! - 01/26/16 03:22 AM
I've learned not to tighten oil filters as much as I used to, after resorting to the screwdriver method too many times!
Posted By: cxjcherokec
Re: Can't get the oil filter off! - 01/27/16 02:55 AM
Remember to put fresh oil on the gasket, a dry gasket will do that every time.