Posted By: basslegacy
Finicky graphs - 06/16/15 10:44 AM
Having issues with my graphs rebooting when I crank the big motor. Also sometimes when idling or running or doing nothing at all. Rockwall marine put in a bigger fuse and a new cranking battery but the problem remains. Has anyone had this issue? Solutions?? I'm thinking I may need to go to higher end cranking battery. Currently running innerstate. Thanks for any advice.
Posted By: basslegacy
Re: Finicky graphs - 06/16/15 10:46 AM
Also does anyone ever use a dedicated battery for their graphs?
Its definitely a low voltage situation,have your charging system checked (stator,rectifier)and the new battery as well,two kinds of parts and such go bad,new ones and old ones
Posted By: OldChamp
Re: Finicky graphs - 06/16/15 01:13 PM
Connect the sonar unit's power cable directly to the cranking battery.
Posted By: BigJake
Re: Finicky graphs - 06/16/15 09:28 PM
the wire to graphs is to small. when the starter engages it draws the volts/amps from the small wire causing your units to shut down. pull 10 or 12 gauge wire from units to battery and problem solved.