Texas Fishing Forum

Motor rebuild shop

Posted By: Biscuits

Motor rebuild shop - 04/20/15 02:37 PM

There is a place in the metroplex area that's does motor rebuilds. Many of you guys have talked about them and give them the thumbs up. They offer a warranty and do a couple hours of motor break-in. What is the name of the company?
Posted By: JoeFriday

Re: Motor rebuild shop - 04/20/15 02:48 PM

Texas Outboard Rebuilders
Posted By: JimmyP

Re: Motor rebuild shop - 04/20/15 03:09 PM

Texas outboard is in Tool Texas by Cedar Creek lake. 4 year warranty , 2 at 100% and 2 at 50 % Not the cheapest but one of the best IMO
Posted By: Biscuits

Re: Motor rebuild shop - 04/20/15 03:21 PM

Thanks guys. That is the one I was thinking about
Posted By: gary purdy

Re: Motor rebuild shop - 04/20/15 07:07 PM

Did you find a bad cylinder? This 150 power head I have is good with 100 to 105 psi on all 6 cylinders on a compression test. Complete dressed motor, no lower unit and w/ bad stator. I know it is because I robbed the good one off of it. Guaranteed. Would meet you part way. 1000.00
Posted By: Biscuits

Re: Motor rebuild shop - 04/20/15 09:29 PM

Originally Posted By: gary purdy
Did you find a bad cylinder? This 150 power head I have is good with 100 to 105 psi on all 6 cylinders on a compression test. Complete dressed motor, no lower unit and w/ bad stator. I know it is because I robbed the good one off of it. Guaranteed. Would meet you part way. 1000.00


I'm taking the motor into the shop this week to have a compression check done and find out what exactly is keeping it from running. I'll know more about it later in the week. If it is dead I am very interested.

Will my lower unit and stator work on the motor you have? It is a 1984.
© 2024 Texas Fishing Forum