HDS12 and HDS9 install needed

I am located in Lewisville and new to the Forum... I have a Skeeter that I need Lowrance graphs installed into. Any good recommendations? Sure this is already a topic but I couldn't find it.

We have you covered on all your installation needs here at shut-up-and-fish

Located in Coppell, Tx. 75019 area about 5 miles east of BPS in Grapevine. 121 and DentonTap

Do you have a retail store there? I work in Coppell and would like to come by if you do.

If you get out to Lake Fork Lake Fork Electronics can do the installs and does have a store front.

Currently I am eCommerce from the home office however you can certainly stop by and I would be happy to show you the Helix model I have on my boat and walk you through the settings and answer any questions you may have.

Hopefully by the end of July I will have moved into my shop/store and have a display of all models available to touch and feel.....

I know you're not close, but if you were in the Texarkana area, I can take care of the installs. I'm the only Lowrance certifed installer in this are.
John

Thank you for all the responses... I was able to connect with David at Shut up and Fish and he did a great job on the install. I would highly recommend using him if you live around the metroplex. He took the time to walk through the entire install before connecting anything and you can tell he really took his time because everything is flush mounted and wires tucked together nicely. He installed a full Lowrance HDS system (12 at the console / 9 at the bow) along with the 3D module and all the proper transducers. Again, his wiring was professionally done and he doesn't cut and splice... He uses the proper brackets and mounts so things are done properly. Thanks again.

Thank you for allowing me to get your boat rigged up for you. It was my pleasure.