Posted By: Jkrez
Gen1 not picking up point1 - 04/24/16 03:07 AM
I Have an hds12 gen2 touch at the console, and an hds7 gen 1 non-touch at the bow. Today I installed a point 1, hooked it up the the N2K network and it's working great on the hds12, but can't get it to show up at all on the hds7 up front. I also can't get the units to share waypoints
i was curious, so we hooked up my friends hds9 gen2 touch at the bow and everything linked up perfectly. The point1 showed up and I was able to share waypoints.
is there anything special I need to do for the gen1 unit? I should note that I do NOT have a yellow Ethernet cable connecting the gen1 to the hds12 gen2 at the console. I figured I would still b able to see the point1 on the gen1 since its hooked to the NMEA2000.
im stumped!