Spotlight Scan after 18.2 Update

Anyone else lose down imaging on their spotlight scan after the 18.2 update? If so have you figured out how to get it back?

My Carbon unit with HDI is running downscan with no issues. May have to reselect your transducer or make sure it is looking for correct source.
Feel free to call me when you are in front of unit - 817-319-1194.

I changed it out with a HDI and it’s working. I’m in the process of adding a point 1 antenna and noticed when I pulled the front cover on my ranger that the guy who installed the SLS and NMEA only had one end terminated. I guess it wasn’t hurting anything as it was working prior to the update. I’m going to re-install the spotlight ducer, do another hard reset and instead of importing my settings I’m gonna add them back by hand and see if it makes a difference.

When you go to downscan check and make sure SOURCE on right side (menu area) is correct.

No luck, the down image is gone after the update. 2D and spotlight work, but DI only shows a faint line on bottom nothing else.

Update: Per Lowrance if you have a Spotlight Scan transducer you have to go back to update 7.0 to get it to work. Will not work with the 18.2 update.