Texas Fishing Forum

Trailer tonge slamming when pulling boat trailer fore ward?

Posted By: Skeeter man ZX225

Trailer tonge slamming when pulling boat trailer fore ward? - 08/27/18 10:14 AM

Looking for info on surge brakes, when I take off the tongue slams but only when I move fore ward even when I slow down and then speed up again??
Posted By: Dayne

Re: Trailer tonge slamming when pulling boat trailer fore ward? - 08/27/18 10:18 AM

You probably have a bad shock in the actuator or need to bleed the brakes.
Posted By: SkeeterRonnie

Re: Trailer tonge slamming when pulling boat trailer fore ward? - 08/27/18 10:37 AM

hydraulic actuator is causing that issue. possible brakes worn out, not enough fluid, or worn out actuator. I would start at the wheels and work your way back to the actuator. mine is doing it now, but wasnt a year ago. i pull my boat pretty aggressively with the truck. I have to do the same thing... gotta find whats worn out in the system.
Posted By: Gamblinman

Re: Trailer tonge slamming when pulling boat trailer fore ward? - 08/27/18 07:34 PM

Just replace the whole brake actuator.
Posted By: shut-up-and-fish

Re: Trailer tonge slamming when pulling boat trailer fore ward? - 08/27/18 08:55 PM


Master cylinder needs fluid and or replaced.
Posted By: Skeeter man ZX225

Re: Trailer tonge slamming when pulling boat trailer fore ward? - 08/29/18 09:42 PM

Thanks I will check those items, just put new pads on last summer. They are still in good shape.
Posted By: RANGER SKI

Re: Trailer tonge slamming when pulling boat trailer fore ward? - 08/29/18 11:39 PM

Did u bleed brakes after installing new actuator? M,use be bled good. Both sides
Posted By: fishinman

Re: Trailer tonge slamming when pulling boat trailer fore ward? - 09/03/18 01:50 PM

Replaced actuator and master cylinder not long ago... All good now...
Posted By: Stump jumper

Re: Trailer tonge slamming when pulling boat trailer fore ward? - 09/11/18 05:11 PM

Originally Posted By: fishinman
Replaced actuator and master cylinder not long ago... All good now...
Did you just replace the parts or the whole complete unit? I probably need to replace mine but have no idea what to buy if I just replace parts. Previous did not believe in getting and or keeping owners manuals. I do know that my trailer has a Buddy Disc brake system.
Posted By: Gamblinman

Re: Trailer tonge slamming when pulling boat trailer fore ward? - 09/28/18 06:48 PM

Just replace the whole actuator as a unit. They aren't that expensive and its saves a lot of headaches in the end. I've found that once one part goes out, it isn't long before another one goes out.
© 2024 Texas Fishing Forum