There are two brown wires on old float switch, and one brown and one black wire on old bilge. New combo bilge/float switch has three wires, red, black and brown. Where do I connect each wire to?

Thanks,

Red goes to + battery for auto bilge. Others connect same as old wires.

What do I do with the brown wires that are now running to the old float switch? Wire the red wire into both of them? If I leave the brown wires connected to the old float switch, the bilge will run constantly, even when there is no water in the boat.

Thanks in advance,

brown w/white stripe is same as red wire on new pump switch.

Thanks Gary,

What you described is one of the brown wires, where do I connect the other brown wire to?